Page 5 of 5

#61 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 9:56 am
by steve s
Those of you that heard my 301/ decca ffss combo at the last owston I think where left impressed ?
I know I was !
It's not been used since though

I also have a grease bearing 301 and a tube of the original grease !

#62 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 10:12 am
by Ant
I think paul means vinylandvalves steve

#63 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 11:04 am
by Cressy Snr
Well he didn't mean me :D

#64 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 12:57 pm
by shane
Paul Barker wrote: Thu Jun 15, 2023 8:46 amNow Ive no idea if anything Shane said has any relevance to the grease bearing Garrard either.
Probably not!

#65 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 1:12 pm
by steve s
Ant wrote: Thu Jun 15, 2023 10:12 am I think paul means vinylandvalves steve
Thanks Ant, I had realised that. I was just adding my twopenith, I'm personally quite impressed by the 301

#66 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 9:49 pm
by Paul Barker
I find it better than the 401, and I compared mine to a Girodec Marble plinth, which was a tiny bit better in the top end. The 301 won hands down everywhere else especially bass. I sold the Girodec.

#67 Re: 401 bearing issues

Posted: Thu Jun 15, 2023 11:58 pm
by Ali Tait
steve s wrote: Thu Jun 15, 2023 9:56 am Those of you that heard my 301/ decca ffss combo at the last owston I think where left impressed ?
I know I was !
It's not been used since though

I also have a grease bearing 301 and a tube of the original grease !
Yep, sounded good to me Steve. Must get that C4E fettled…

#68 Re: 401 bearing issues

Posted: Fri Jun 16, 2023 10:51 pm
by Daniel Quinn
Right so I've pointed to a chart which establishes any oil will do , but people prefer personnel testimony , humour and the mysterious difference between a 301 and 401.
.

I give up.

#69 Re: 401 bearing issues

Posted: Sat Jun 17, 2023 6:36 am
by Cressy Snr
As someone primarily concerned with establishing the facts, it can’t be easy having to read subjectivist claptrap like this. You have my sympathy. It must be terribly frustrating to have to witness old men talking complete bollocks day in, day out about what grade of oil to put in the bearings of shellac spinning contrivances that long ago, should have been melted down for frying pans.

#70 Re: 401 bearing issues

Posted: Sat Jun 17, 2023 8:58 am
by shane
Daniel Quinn wrote: Fri Jun 16, 2023 10:51 pm Right so I've pointed to a chart which establishes any oil will do , but people prefer personnel testimony , humour and the mysterious difference between a 301 and 401.
.

I give up.
The difference between theory and practice is that in theory, theory is always correct whereas in practice, it isn't.

You may have a chart telling you that oils don't make any difference but I have a pair of ears that tell me they do.