45 SET

What people are working on at the moment
User avatar
Paul Barker
Loony Bin!
Posts: 9413
Joined: Mon May 21, 2007 9:42 pm

#106 Re: 45 SET

Unread post by Paul Barker »

Id be worried about having 240v into low voltage side. But I suppose if its survived its rest of life shouldn’t stress it. However up to the fuse blowing it was exposed to rediculously high voltage and get very hot, insulation damaged very likely, the small number of turns mean a dead short near enough, which usually fries the winding. But youre fuse might have taken it all before the transformer cooked. If you’ve got away with one IEC socket and a pile of blown fuses its possible and not sertain death, but it is possible death where we are with it now.

Ive made loads of other mistakes, but my strange mind would never let me wire a transformer backwards as I studied and wound power transformers so inside my head when Im hooking up I visualise the mechanics pictorally. So my strange visual mind wont facilitate that mistake as Im not just hooking up something I dont understand to every level.

My biggest fo pa on a newly hooked up amp was to fit a microwave emi filter on the input which Id got too close to the pain of the steel chassis, soon after it arked through and did that take me quite a time for the penny to drop as it was unseen damage, behind where I mounted it, and I never actually worked it out. I accidentally found it when rewiring other things chasing the current draw, and had to move the emi filter, where upon I saw the problem. In the event I cut it out.

Just history now.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#107 Re: 45 SET

Unread post by simon »

Yeah that does nag at me a little, hopefully the secondaries are okay. I'll find out eventually I guess.
User avatar
Nick
Site Admin
Posts: 16065
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#108 Re: 45 SET

Unread post by Nick »

Given you have blown up several fuses, it would be unlikely that the very last time you tried it would be the time the transformer broke. Possible, but seems unlikely.

Why would a (at least) 1.5A 2.5v winding get worried about passing current that would blow a 2.5A fuse?

Again, heat is a product of power over time, reduce the time and you get little or no heat, with little or no heat why would the transformer care.

Colin's 300b Amp is built around a pair of transformers that came out of a amp I built for someone, that due to a voltage spike on his mains, caused the bridge rectifier that was after the 300b heater winding to turn into a short. Lots of current was passed, the primary fuse didn't blow as the heater winding was a small fraction of the total power (good reason to fuse secondaries of transformers), the internal wiring was scorched and it was all a mess. I replaced the transformers of course, but Colin used them (with knowledge of the previous) to get the amps going with the plan to replace them in the future. That was probably at least 5 years ago. They are still both working.

YMMV.

The only lesson I would take from this is use ceramic body, high current break fuses.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#109 Re: 45 SET

Unread post by simon »

Good point well made.

I thought they were ceramic when I ordered them TBH.
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#110 Re: 45 SET

Unread post by simon »

I made the changes this morning and with some trepidation plugged it in after checking voltages. Good news, sound! Bad news, only on the left channel.

I've switched input phonos, 5751 drivers, and 45s one at a time and it doesn't follow, so it's something to do with the right channel.

The voltages check out at anodes and cathodes of all valves so I think they must be conducting okay. So I broke the scope out, which was a bit of an adventure as it's a long time since I last used it. I've traced signal as far as the 45 grid but before I stick the probe on the 45 anode at 340V I thought it worth checking that my 300V x10 probe will be okay. Too many bangs this week already. And it's a bit of a pig to get to the anode tag of the socket.

My suspicion/fear at the moment is the OPT secondary has gone. I can switch the OPTs over to prove/disprove.
User avatar
Paul Barker
Loony Bin!
Posts: 9413
Joined: Mon May 21, 2007 9:42 pm

#111 Re: 45 SET

Unread post by Paul Barker »

Oh pooh
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
Mike H
Amstrad Tower of Power
Posts: 20321
Joined: Sat Oct 04, 2008 5:38 pm
Location: The Fens
Contact:

#112 Re: 45 SET

Unread post by Mike H »

But heater TX's are OK?
 
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#113 Re: 45 SET

Unread post by simon »

Looks to be yes, both illuminated filaments visible
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#114 Re: 45 SET

Unread post by simon »

Phew! It's not the OPT. It took some finding but there was a single strand from the earth screen attached to the signal input to the driver.

Now I've just remembered I didn't reconnect the driver grid leak resistors...
User avatar
Nick
Site Admin
Posts: 16065
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#115 Re: 45 SET

Unread post by Nick »

Yay!
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#116 Re: 45 SET

Unread post by IslandPink »

:wav:
"Once you find out ... the Circumstances ; then you can go out"
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#117 Re: 45 SET

Unread post by simon »

Yeah a pretty good afternoon...
User avatar
Mike H
Amstrad Tower of Power
Posts: 20321
Joined: Sat Oct 04, 2008 5:38 pm
Location: The Fens
Contact:

#118 Re: 45 SET

Unread post by Mike H »

Image


This is why I use a magnifying glass...
 
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#119 Re: 45 SET

Unread post by simon »

I needed glasses and an illuminated magnifying light. If it had been on the other side of the wire tucked away I might still be looking now.

Actually the next job was to unsolder rhe signal and screen to inspect as it was looking like the wire was knacked when I checked it for continuity - that's how I found it.

Anyway, clearly I need to brush up on my scope skills as I was way off.
User avatar
pre65
Amstrad Tower of Power
Posts: 21465
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#120 Re: 45 SET

Unread post by pre65 »

Simon, I'm glad to see you got to the root of the problem, and without having to spend lots of beer tokens. :D
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
Post Reply