#1 For sale : 18Sound 10W400
Posted: Fri Mar 05, 2021 4:10 pm
For sale -
ONE 18Sound 10W400 driver.
Either unused or briefly tested. Left over from my tapped horn project, I decided not to build a second tapped horn.
This driver was the best spec I could find at the time, for a tapped horn driver operating in the 30-150Hz region. It gave better potential bandwidth than all similar units. Now discontinued , datasheet in their archive, here :
http://www.eighteensound.com/en/product ... 400%20.pdf
Used conventionally, this is a Pro midrange driver, eg. for use in a sealed box. Note the Fs of 70Hz and Qts of 0.4
Driver is in near-perfect condition, there are a few bits of fluff and cardboard on the sticky cone surround. With box ; the box has a slight bit of damage in a couple of places.
Looking for £75 or vno .
ONE 18Sound 10W400 driver.
Either unused or briefly tested. Left over from my tapped horn project, I decided not to build a second tapped horn.
This driver was the best spec I could find at the time, for a tapped horn driver operating in the 30-150Hz region. It gave better potential bandwidth than all similar units. Now discontinued , datasheet in their archive, here :
http://www.eighteensound.com/en/product ... 400%20.pdf
Used conventionally, this is a Pro midrange driver, eg. for use in a sealed box. Note the Fs of 70Hz and Qts of 0.4
Driver is in near-perfect condition, there are a few bits of fluff and cardboard on the sticky cone surround. With box ; the box has a slight bit of damage in a couple of places.
Looking for £75 or vno .
