Yep, it would be back to where I am with the Emanance I guess.The Quasars would need to be redesigned to take advantage of the SB 15 inchers... And would end up bigger.... Ideally wider, deeper and taller...
PERSPEX QUASAR ver 2.0 prototype build
#211 Re: PERSPEX QUASAR ver 2.0 prototype build
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#212 Re: PERSPEX QUASAR ver 2.0 prototype build
You little tinker !
"Once you find out ... the Circumstances ; then you can go out"
#213 Re: PERSPEX QUASAR ver 2.0 prototype build
I know you have talked enthusiastically about some full range field coil drivers you have listened to in the past at one the shows you attended. So, if I were you, I'd call in one those favours from Dave Slagle and see if he can be persuaded to do a conversion on the spare pair PM6 silver Lowther's you have.
I for one would love to hear what these could do on the acrylic baffles. I reckon they could be a bit special with the Supravox that we know are very good bass/midrange drivers and work well on the existing Quasar baffles.
I for one would love to hear what these could do on the acrylic baffles. I reckon they could be a bit special with the Supravox that we know are very good bass/midrange drivers and work well on the existing Quasar baffles.
#214 Re: PERSPEX QUASAR ver 2.0 prototype build
As an aside - I really like the SB drivers and I have used the 12" & 10" drivers in sub-woofers very successfully. My TV speakers use the a 12" SB mono sub with two Mark Audio fullrange satellites crossed over at about 150Hz and they work really well here - although if you listen critically the tone and speed difference between the SB sub and the MarkAudio drivers is clear..
It will be really interesting to hear how the OB specific 18" sounds...
James
It will be really interesting to hear how the OB specific 18" sounds...
James
#215 Re: PERSPEX QUASAR ver 2.0 prototype build
Its a good day
- Attachments
-
- Ready to ship
- q3.jpg (134.52 KiB) Viewed 2863 times
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#216 Re: PERSPEX QUASAR ver 2.0 prototype build
Crikey, that's shoddy !
"Once you find out ... the Circumstances ; then you can go out"
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#217 Re: PERSPEX QUASAR ver 2.0 prototype build
Mind you don't scratch 'em
Sgt. Baker started talkin’ with a Bullhorn in his hand.
#218 Re: PERSPEX QUASAR ver 2.0 prototype build
A good yet shoddy day indeed.
#219 Re: PERSPEX QUASAR ver 2.0 prototype build
Well you know that will happen
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- andrew Ivimey
- Social Sevices have been notified
- Posts: 8318
- Joined: Mon Jun 11, 2007 8:33 am
- Location: Bedford
#220 Re: PERSPEX QUASAR ver 2.0 prototype build
Kerrrr aye keeee!!!!!
Philosophers have only interpreted the world - the point, however, is to change it. No it isn't ... maybe we should leave it alone for a while.
- mainscablesrus
- Old Hand
- Posts: 638
- Joined: Thu Jun 16, 2011 12:13 pm
- Location: Huddersfield
- Contact:
#221 Re: PERSPEX QUASAR ver 2.0 prototype build
About bloody time! LOL
You can't change how people treat you or what they say about you. All you can do is change how you react to it.
Mohandas Karamchand Gandhi
Mohandas Karamchand Gandhi
#223 Re: PERSPEX QUASAR ver 2.0 prototype build
Sorry, I couldn't resist!
- Dave the bass
- Amstrad Tower of Power
- Posts: 12276
- Joined: Tue May 22, 2007 4:36 pm
- Location: NW Kent, Darn Sarf innit.
#224 Re: PERSPEX QUASAR ver 2.0 prototype build
Pro-level shoddyness has been achieved.
"The fat bourgeois and his doppelganger"
#225 Re: PERSPEX QUASAR ver 2.0 prototype build
Hi Nick
The following substance will be a good candidate to use to alleviate a concern for a scratch.
BMW use it on removable roof inset window panels, I am sure it will be good enough for the Quasar Baffle
TPU for Scratch-Resistant Flexible Windows
GEBA Kunststoffcompounds GmbH uses highly scratch-resistant TPU Texin DP 3041
The following substance will be a good candidate to use to alleviate a concern for a scratch.
BMW use it on removable roof inset window panels, I am sure it will be good enough for the Quasar Baffle
TPU for Scratch-Resistant Flexible Windows
GEBA Kunststoffcompounds GmbH uses highly scratch-resistant TPU Texin DP 3041