what are you doing ?
- andrew Ivimey
- Social Sevices have been notified
- Posts: 8318
- Joined: Mon Jun 11, 2007 8:33 am
- Location: Bedford
#886 Re: what are you doing ?
I've been there; govt ecc81 for £6 - Mullards by another name- cv etc - all gone now.
It's the sort of shop where 19 set tx/rx s were 49 shillings and 11 pee when I couldn't afford that. Oxford had a bigger version of that shop....
It's the sort of shop where 19 set tx/rx s were 49 shillings and 11 pee when I couldn't afford that. Oxford had a bigger version of that shop....
Philosophers have only interpreted the world - the point, however, is to change it. No it isn't ... maybe we should leave it alone for a while.
- jack
- Thermionic Monk Status
- Posts: 5502
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#887 Re: what are you doing ?
That'd be J. Birkett - extremely famous old shop in the same vein as Proops and other war surplus suppliers.
Vivitur ingenio, caetera mortis erunt
- andrew Ivimey
- Social Sevices have been notified
- Posts: 8318
- Joined: Mon Jun 11, 2007 8:33 am
- Location: Bedford
#888 Re: what are you doing ?
Yep... there was also 'the shop on the bridge' in Reading. Nostalgia ain't what it used to be ...
Philosophers have only interpreted the world - the point, however, is to change it. No it isn't ... maybe we should leave it alone for a while.
-
- Thermionic Monk Status
- Posts: 5647
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#889 Re: what are you doing ?
I've looked in the window of that shop in Lincoln a number of times, but it's never been open. Probably a good thing.
- jack
- Thermionic Monk Status
- Posts: 5502
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#890 Re: what are you doing ?
Vivitur ingenio, caetera mortis erunt
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#891 Re: what are you doing ?
I had my 2nd coach trip this month, today. To Broadway in the Cotswolds, and a steam hauled round trip on the GWR (Gloucestershire and Warwickshire Railway).
From tomorrow onwards steam is banned on that line (and many others) because of the danger of lineside fires.
And, SOB SOB, my big charter train trip on 20th August, from Ely to Kingswear has been cancelled.
May be due to impending railway workers strike action on that day ? Whatever, I've been looking forward to that since we booked tickets in February.
From tomorrow onwards steam is banned on that line (and many others) because of the danger of lineside fires.
And, SOB SOB, my big charter train trip on 20th August, from Ely to Kingswear has been cancelled.
May be due to impending railway workers strike action on that day ? Whatever, I've been looking forward to that since we booked tickets in February.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#892 Re: what are you doing ?
I stripped down one of my bikes yesterday and replaced the bottom bracket and crankset. Today I will service the wheel bearings, fit new tyres and give the rest of the bike a deep clean.
Sorry, I couldn't resist!
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#893 Re: what are you doing ?
Just finished watching a 2013 Sky Arts documentary I taped last night about the resurgence of analogue modular synthesizers, their pioneers and the current younger builders, users and musicians. ‘I Dream of Wires.’ About three quarters of the way through the programme, who should turn up but Eric Barbour of VTV and Svetlana fame, talking about his tube modules that fit into Euroracks. His firm Metasonix has been going since he found himself ‘unemployed’ in the early 2000s. The man is crazy; a cross between Richard Dunn and Dr Gizmo. His marketing methods are…er…..interesting.
An interview from years ago:
https://www.synthtopia.com/content/2004 ... nic-music/
Metasonix T1 synthsizer:
https://www.metasonix.com/t1-synthesizer-new/
Thought it might be interesting.
An interview from years ago:
https://www.synthtopia.com/content/2004 ... nic-music/
Metasonix T1 synthsizer:
https://www.metasonix.com/t1-synthesizer-new/
Thought it might be interesting.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
#894 Re: what are you doing ?
you heard right......buy it now or get screwed.
There's nowhere you can be that isn't where you're meant to be
-
- Old Hand
- Posts: 1081
- Joined: Sat Jan 26, 2013 12:08 pm
#895 Re: what are you doing ?
Just finished changing the glass in the garden room bay windows, 14 hours yesterday and 5 this morning, 24 double glazed units removed and replaced with more efficient units with reflective coatings and krypton gas fill. Hopefully with 14 m2 of glass in that room, the more efficient units will pay for themselves. (Calcs would suggest almost a kw less loss)
The hot weather was an aid, as it made removing the old butyl glazing tape really easy, it almost fell off. The rebates of the utile timber frames were as good as the day we put them in 24 years ago. So should last a long time still.
Now got to wait for it to cool down before I can give them a coat of paint. I have noticed the coating, which looks slightly mirrored from the outside is cutting down the solar gain too.
The hot weather was an aid, as it made removing the old butyl glazing tape really easy, it almost fell off. The rebates of the utile timber frames were as good as the day we put them in 24 years ago. So should last a long time still.
Now got to wait for it to cool down before I can give them a coat of paint. I have noticed the coating, which looks slightly mirrored from the outside is cutting down the solar gain too.
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#896 Re: what are you doing ?
Just fitted a new mixer tap to the kitchen sink.
The old tap was getting harder to operate with arthritic fingers, so now we have one with levers that are light as a feather.
The old tap was getting harder to operate with arthritic fingers, so now we have one with levers that are light as a feather.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- Dave the bass
- Amstrad Tower of Power
- Posts: 12276
- Joined: Tue May 22, 2007 4:36 pm
- Location: NW Kent, Darn Sarf innit.
#897 Re: what are you doing ?
What are you doing ?
I'm trying to work out what size me balls are (shurrup already DTB).
Above is what I'm measuring, as you can see, on the metric scale I can measure to 0.05mm, so I'm seeing 5.55mm.
On the Imperial scale, I'm a bit stuck. I can read/see the imperial increments in 1/16, 1/8 and 1/4 and 1/2" but the smaller scale marked 1/128th... I don't know how to read it. I can see the number '4' on the lines up on the top scale but I don't know what that means or how to read that division.
FWIW, I think its something to do with 1/32 of an inch because 5.56mm = 7/32" which I believe is the size of this ball bearing.
Here's some close ups of the scales....
Can anyone here explain what I'm seeing but not really understanding?
Ta.
I'm trying to work out what size me balls are (shurrup already DTB).
Above is what I'm measuring, as you can see, on the metric scale I can measure to 0.05mm, so I'm seeing 5.55mm.
On the Imperial scale, I'm a bit stuck. I can read/see the imperial increments in 1/16, 1/8 and 1/4 and 1/2" but the smaller scale marked 1/128th... I don't know how to read it. I can see the number '4' on the lines up on the top scale but I don't know what that means or how to read that division.
FWIW, I think its something to do with 1/32 of an inch because 5.56mm = 7/32" which I believe is the size of this ball bearing.
Here's some close ups of the scales....
Can anyone here explain what I'm seeing but not really understanding?
Ta.
"The fat bourgeois and his doppelganger"
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#898 Re: what are you doing ?
It's a vernier, innit.
Looks like you've got 3/16 plus 4 x 1/128 there.
That ties up , it's the same as 5.55mm.
Looks like you've got 3/16 plus 4 x 1/128 there.
That ties up , it's the same as 5.55mm.
"Once you find out ... the Circumstances ; then you can go out"
- Dave the bass
- Amstrad Tower of Power
- Posts: 12276
- Joined: Tue May 22, 2007 4:36 pm
- Location: NW Kent, Darn Sarf innit.
#899 Re: what are you doing ?
Erks!? Adding fractions? Erm, hows that done? I'm even more stuck!
PS, Ta Mark!
PS, Ta Mark!
"The fat bourgeois and his doppelganger"
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#900 Re: what are you doing ?
According to my drill size chart,
7/32 inches = 0.2187 inches or 5.5550 mm
Plenty of that size balls for sale on Ebay.
https://www.ebay.co.uk/sch/i.html?_from ... s&_sacat=0
7/32 inches = 0.2187 inches or 5.5550 mm
Plenty of that size balls for sale on Ebay.
https://www.ebay.co.uk/sch/i.html?_from ... s&_sacat=0
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)