401 up & turning!

301, 401, plinths and assorted idler stuff
User avatar
andrew Ivimey
Social Sevices have been notified
Posts: 8406
Joined: Mon Jun 11, 2007 8:33 am
Location: Bedford

#1 401 up & turning!

Unread post by andrew Ivimey »

I just bolted a 401 down to a heavyweight wooden block and screwed down (though deftly decoupled) the ancient Mayware (re-wired by mine own fairly clumsy hands - I spilled the coffee all down my front just now while trying to explain auditory neuropathy to a colleague who had phoned to disturb my precious holi-day); and such coffee!)

VTA right, weight more or less right, he switched on.

Cor it sounds nice even though the 103 cantilever is a bit bent - little phroaaaaaar!

Vinyl can sound so wonderful (through much modded WADpre2 & phony 2, to rebuilt Quad303 to ESS AMT1Es - fabby roos.

Anthony, if you read this, keep your 401 (or give it to ME!!!!!!!!)
User avatar
Mike H
Amstrad Tower of Power
Posts: 20319
Joined: Sat Oct 04, 2008 5:38 pm
Location: The Fens
Contact:

#2

Unread post by Mike H »

Well done you :D



 
 
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
Graeme
Needs to get out more
Posts: 1566
Joined: Tue Oct 28, 2008 9:25 pm

#3

Unread post by Graeme »

I'd try no de-coupling between the arm and the garrard.

IMO arm and bearing want to be rigidly fixed in position in relation to each other.
stewartwen
User
Posts: 5
Joined: Fri Jul 23, 2010 4:42 pm
Location: St. Annes

#4

Unread post by stewartwen »

Mayware arms are stunning! I have one, I am in the process of putting a slighly longer arm tube into it, and rewiring it. They do something that conventional gimballed arms dont.
A thumbs up from me!!!
S
stewartwen
User
Posts: 5
Joined: Fri Jul 23, 2010 4:42 pm
Location: St. Annes

#5

Unread post by stewartwen »

Double post......................duh
Post Reply