And yes, I think the TLV has 1.24V ref. I used them for 4P1L and 2P29L but I cheated and used a trimmer so maybe I didn't have to work anything out. Can't remember.
Andrew wrote: Fri Jan 03, 2014 4:43 pm
Gerbers for the 1.5A version are coming along.
Hi Andrew,
Are you still selling pcbs for the 1,5 A version? I'm searching for an upgraded filament supply for my 300b amp. Would the small version be adequate?
If you are not selling the boards anymore, would there be a chance of you sharing the gerber files for the board?
Thank you very much in advance for your most appreciated help.
Martin
The smaller board, with the 'integral' heatsink, is perfect for 300Bs. Or, you can use the bigger board and mount onto a suitable part of the chassis of your build.
How many do you need?
PS The difference between the two designs is just the heatsink and mounts for two extra caps on the so-called bigger board, if you prefer to mount onto a chassis, for a 300B you could just leave off the two extra caps.
Analogue, the lost world that lies between 0 and 1.
Hello Andrew,
Been away from building amps for about ten years. Now retired with more time to spend. Will build a few SE amps with 4P1L and 6B4G for my horn system. Ie will need a few regulator boards. Please mail info at lars(at)soderquist(.)se.
Cheers
Lars
