Nothing In Particular

Subjects that don't have their own home
User avatar
Paul Barker
Loony Bin!
Posts: 9365
Joined: Mon May 21, 2007 9:42 pm

#16741 Re: Nothing In Particular

Unread post by Paul Barker »

jack wrote: Fri Sep 20, 2024 8:46 pm
Ali Tait wrote: Fri Sep 20, 2024 11:56 am It's a road sign just along from Conundrum, turn off for Doon Hill. :-)
There's a Spott nearby that's worth a visit...
Image
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
Paul Barker
Loony Bin!
Posts: 9365
Joined: Mon May 21, 2007 9:42 pm

#16742 Re: Nothing In Particular

Unread post by Paul Barker »

My diagnosis is a bad protein in the brain weblike almost like dementia scenario but this one weakens blood circulation in brain. In York hospital from Scarborough haspital over night. In good hands. I may not build amy more amps i certainly wont do tradesman work. Wont drive. Diana admitted to ward I was on at Scarborough. We embraced and kissed.

Cerebral amyloid angiopathy
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
Paul Barker
Loony Bin!
Posts: 9365
Joined: Mon May 21, 2007 9:42 pm

#16743 Re: Nothing In Particular

Unread post by Paul Barker »

Consultant just had a quick stop . Cerebral amyloid angiopathy. Keep my blood pressure down low dose of drugs for that. Get own monitor, keep bp low . No more grunt work. Light weights ecentric, cardio. Knows the consultants in Leeds I had worked under at St James and Seacroft. Top guy passing on basic knowledge fast on way to emergencies. Great!?
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
jack
Thermionic Monk Status
Posts: 5635
Joined: Wed Dec 29, 2010 8:58 pm
Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
Contact:

#16744 Re: Nothing In Particular

Unread post by jack »

Bit of a bummer. Sorry to hear that Paul. I hope you can keep the symptoms under control - preventing vascular damage is obviously the key. Is this hereditary?
Vivitur ingenio, caetera mortis erunt
User avatar
Paul Barker
Loony Bin!
Posts: 9365
Joined: Mon May 21, 2007 9:42 pm

#16745 Re: Nothing In Particular

Unread post by Paul Barker »

jack wrote: Mon Sep 23, 2024 8:25 am Bit of a bummer. Sorry to hear that Paul. I hope you can keep the symptoms under control - preventing vascular damage is obviously the key. Is this hereditary?
Apparently . Its in youre dna and very rare.

No reason I. Ant teach new pathways to the neural network to control the limbs et al. Main thing is keep bp low so dont bleed in brain.

Then can look forward to slowly build valve projects.

No moredeadlifting.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
Paul Barker
Loony Bin!
Posts: 9365
Joined: Mon May 21, 2007 9:42 pm

#16746 Re: Nothing In Particular

Unread post by Paul Barker »

jack wrote: Mon Sep 23, 2024 8:25 am Bit of a bummer. Sorry to hear that Paul. I hope you can keep the symptoms under control - preventing vascular damage is obviously the key. Is this hereditary?
Apparently . Its in youre dna and very rare.

No reason I. Ant teach new pathways to the neural network to control the limbs et al. Main thing is keep bp low so dont bleed in brain.

Then can look forward to slowly build valve projects.

No moredeadlifting.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
steve s
Shed dweller
Posts: 2874
Joined: Wed May 30, 2007 6:19 pm
Location: east yorks

#16747 Re: Nothing In Particular

Unread post by steve s »

Old age and its associated health is a reality now for us Paul, best of luck..
The tube manual is quite like a telephone book. The number of it perfect. It is useful to make it possible to speak with a girl. But we can't see her beautiful face from the telephone number
User avatar
Cressy Snr
Amstrad Tower of Power
Posts: 10724
Joined: Wed May 30, 2007 12:25 am
Location: South Yorks.

#16748 Re: Nothing In Particular

Unread post by Cressy Snr »

New living room setup. We have been decorating for the last week or so and I'm completely knackered. Getting too old for this kind of malarkey, and it cost us a bleed'n fortune. :shock: Trouble is, once you decorate one room, the rest of the house starts to look like a shit tip, so we've only just started really. Still, "It'll keep him out of mischief," as the woman on the till at Dunelm said to the missus. :lol:
IMG_0539.jpeg
IMG_0539.jpeg (121.15 KiB) Viewed 9561 times
The absolute sound is not a priority these days, hence the speaker placement at each end of the new 6ft wide TV bench, and the straight arm on the TT upstairs :lol:
Our Ant has the Mission floor-standers from Ray's mate at the moment.
New speakers are Q Acoustics 3010i bookshelf speakers. Bass/mid driver is 4in. They do an excellent job given the placement and work well in the small room.
Last edited by Cressy Snr on Tue Oct 01, 2024 8:01 pm, edited 1 time in total.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
User avatar
jack
Thermionic Monk Status
Posts: 5635
Joined: Wed Dec 29, 2010 8:58 pm
Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
Contact:

#16749 Re: Nothing In Particular

Unread post by jack »

Just a quick heads-up...

We have an older gshp which has been great since installation.

Last week we got an LP (low pressure) alert on the ground source loop. Diagnostics showed that attempting a service mode cold start of the ground source loop pump failed.

Our provider said this proved that the pump needed replacing - about £600 plus £300 + VAT for the engineer... ie over a grand to fix.

I check that the pump was getting power when it should and it was, so I took the pump cover off and low and behold... inside was a start/run capacitor. The pump shaft was also moving freely , so the pump wasn't jammed and there were no signs of damage (smell, carbon deposits etc.). The windings were testing continuous too.

It was marked at 8uF +5% -0% however measured at 3.7uF. A quick trip to my local white-goods repair shop, a new 8uF cap for £9.90 and ...

...the motor now runs and the heat pump is back.

About £1,000 saved by doing a simple check. The capacitor is internal to the pump motor but is easily accessible. As most companies nowadays just do module rather than component level fixes, the customer can pay heavily for unnecessary work ...
Vivitur ingenio, caetera mortis erunt
brig001
Old Hand
Posts: 597
Joined: Sat Nov 13, 2010 9:56 pm
Location: Back home in Preston now

#16750 Re: Nothing In Particular

Unread post by brig001 »

Cressy Snr wrote: Tue Oct 01, 2024 7:47 pm Bass/mid driver is 4in. They do an excellent job given the placement and work well in the small room.
Looks good!
It’s surprising how good small speakers can sound in a smaller room when you don’t need huge SPL

Brian
Morgan Jones
Old Hand
Posts: 260
Joined: Fri Mar 25, 2016 10:58 am

#16751 Re: Nothing In Particular

Unread post by Morgan Jones »

Failed capacitors on pumps are rather common. It's because they make the capacitor too small, forcing a high voltage gradient across the dielectric, causing early demise. And the giveaway is invariably low capacitance. We had this problem with about 600 pumps, when I worked out what the problem was, there were hardly any pumps with the correct capacitance. I took a capacitor off a new pump, measured its capacitance, then stressed it for a few seconds with about 1500VDC. Capacitance after that was measurably lower. I had some new capacitors specially made (significantly larger) and stressed some to 2kVDC without change in capacitance.
In the end, it's all physics...
User avatar
jack
Thermionic Monk Status
Posts: 5635
Joined: Wed Dec 29, 2010 8:58 pm
Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
Contact:

#16752 Re: Nothing In Particular

Unread post by jack »

Morgan Jones wrote: Tue Oct 01, 2024 9:11 pm Failed capacitors on pumps are rather common. It's because they make the capacitor too small, forcing a high voltage gradient across the dielectric, causing early demise. And the giveaway is invariably low capacitance. We had this problem with about 600 pumps, when I worked out what the problem was, there were hardly any pumps with the correct capacitance. I took a capacitor off a new pump, measured its capacitance, then stressed it for a few seconds with about 1500VDC. Capacitance after that was measurably lower. I had some new capacitors specially made (significantly larger) and stressed some to 2kVDC without change in capacitance.
Being fair, up till now, this pump has performed flawlessly for 20 years. It's a Wilo TOP-S30/10, so a quality item and a very expensive one too. There's 600 MTRS of pipework underground that this pump has to push water/glycol through for many hours every day. It's a tough job.

I'll replace the cheapo cap I got today with a right-sized quality one from RS or Farnell later in the week - then I'll be able to put the lid on again!

PXL_20241001_161732183_copy_897x675.jpg
PXL_20241001_161732183_copy_897x675.jpg (118.51 KiB) Viewed 9520 times
IMG-20241001-WA0003_copy_864x1536.jpg
IMG-20241001-WA0003_copy_864x1536.jpg (83.28 KiB) Viewed 9519 times
Vivitur ingenio, caetera mortis erunt
Morgan Jones
Old Hand
Posts: 260
Joined: Fri Mar 25, 2016 10:58 am

#16753 Re: Nothing In Particular

Unread post by Morgan Jones »

Definitely replace that with a proper capacitor; it looks too small for its capacitance, even before wondering what voltage is across it. 20 years is a very good life for a pump, so I think it can be excused for a capacitor failing.
In the end, it's all physics...
User avatar
jack
Thermionic Monk Status
Posts: 5635
Joined: Wed Dec 29, 2010 8:58 pm
Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
Contact:

#16754 Re: Nothing In Particular

Unread post by jack »

Morgan Jones wrote: Tue Oct 01, 2024 10:48 pm Definitely replace that with a proper capacitor; it looks too small for its capacitance, even before wondering what voltage is across it. 20 years is a very good life for a pump, so I think it can be excused for a capacitor failing.
A little more on this: The original capacitor was 25mm in diameter and 73mm long - an odd shape but designed to fit into a small space in the motor control box. I haven't yet found one that size from a 3rd party - they're all a minimum of 30mm in diameter.

I found the actual Wilo part number and got a quote for a replacement. £69+VAT !! For a motor start/run capacitor that should be a maximum of around £15 including VAT...

So, for the moment at least, the current replacement is staying there. Not pretty, but it works just fine.
Vivitur ingenio, caetera mortis erunt
Ant
Shed dweller
Posts: 2437
Joined: Mon Jul 31, 2017 6:45 pm
Location: Yorkshire

#16755 Re: Nothing In Particular

Unread post by Ant »

Quite a few things have been listened to today, all on the cans.

I finally got the jvc ql-y3f completely fixed by milling out a(nother) replacement arm lifter and fitting it with a guide pin so it cant rotate, which the earlier one was doing. It resulted in it not lifting because it had moved, but trying to return the arm, dragging the stylus across the record surface...... so i took it out and put the technics in instead.

Its now in full working order. Apart from the repeat function which i dont care enough about to source a replacement extrememly hard to find switch for. So that can stay broken.

We now have the jvc into the benedict audio hothead, into the myryad hpa, into the sundaras.

It was quicker and easier (relatively speaking) to completely fix the jvc by making the required part than to fix the technics sl150 which was doing lp duty in the headphone system. Which has now developed recalcitrant speed stability. Because i dont have any of the required caps in stock to recap it, but i did have some scrap aluminium to make another lifter with.

Some nasty godawful alloy, not sure what grade it is but it was awful to machine. Got there with it in the end after i decided not to follow the pattern of the original part, but to just make something that worked and had all the bits in the right places instead.

This deck is one of my favourites, lovely sounding old thing.

I pulled the board out of the technics to make a bom, just need to get them ordered come pay day.
I might order some bits for the original xerxes power supply while in at it. Might put the tabriz back on the xerxes and gregs mayware on the technics. If i ever get around to it
Also starring Rex Hamilton as Abraham Lincoln

www.bte-designs.weebly.com
Post Reply