45 SET

What people are working on at the moment
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#151 Re: 45 SET

Unread post by simon »

Whilst surfing the waves I came across these monsters - 200uF 800VDC MKP PP caps for £14.38. Worth a try for a power supply perhaps?

https://www.mouser.co.uk/ProductDetail/ ... 2DHw%3D%3D
User avatar
pre65
Amstrad Tower of Power
Posts: 21465
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#152 Re: 45 SET

Unread post by pre65 »

Monsters ? :lol:

Baked bean tin sized ones are big, but all mine are electrolytic.

My biggest PP caps are 85mm x 130mm, 1900v DC - 40A - 130uf.
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#153 Re: 45 SET

Unread post by simon »

Only 130uF? ;-)
User avatar
pre65
Amstrad Tower of Power
Posts: 21465
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#154 Re: 45 SET

Unread post by pre65 »

simon wrote: Mon Apr 15, 2024 8:44 pmOnly 130uF? ;-)
Yep, shameful really. :wink:
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
Paul Barker
Loony Bin!
Posts: 9408
Joined: Mon May 21, 2007 9:42 pm

#155 Re: 45 SET

Unread post by Paul Barker »

Thanks for the remider. Finding the EL36, it confirmed my view it is a dead duck. Disgracefull distortiin. Shame it doesnt have 10Y or 801a. Good that GM70 at full power is as good as it measured for me. But also the 211 holds its own, and considering there is more reasons not portrayed in any characteristic curves, and though the GM70 ought to be Mr Perfect, I have a hankering for the 211 again. Oh and bye the way the 212 makes the GM70 sound plain. No 833 but that also comes with more excitement than the 212 and the GM70. So the distortion estimates dont tell the complete story, but clearly obvious warnings from the alleged distortion programmed into this spice vehicle arent necessarily right. Though for now the 801a will make a good stepping stone in that direction, and its distortion profile measured from printed charts by me with a vernier says dont ignore this option. Considering how distorted the popular dhts like 2a3 px4 appear. There is another sleeper not listed the EL38. The only triode curves available are the 37. All I have to go on is the visible appearance is the same as the EL37. So I’ll just give it ago without curves and see what my ears say. Compared to the EL34. So Im not yet given up on TV tubes just because EL36 looked like a crazy choice to promote at ETF. Maybe the curves are wrong and the character is not. But I’ll give the EL38 a try. In the end I’ll build the latest utracer and put characteristic curves for the triode connected characteristic curves of the EL38. Though they appear to be quite rare. I guess if I publish characteristic curves almost matching EL37 Id better buy me some more before doing so.

Enjoying these meandering through the Vade Mecum.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
simon
Thermionic Monk Status
Posts: 5901
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#156 Re: 45 SET

Unread post by simon »

I guess to some extent even measuring off the published curves is a bit of a lottery as it depends on how close our actual valves conform to the averaged graphs?
Post Reply