Hornresp query - TL design Tool

Subjects that don't have their own home
User avatar
Needs to get out more
Posts: 1802
Joined: Sat Sep 08, 2007 11:03 am

#16 Re: Hornresp query - TL design Tool

Post by Scottmoose »

Too long, too low tuned, not enough damping. Try for Fp = Fs/Qts' where Qts' = Qts including relevant compensation for amplifier output impedance or equivalent series R.
'"That'll do," comes the cry of the perfectionist down the ages.' (James May The Reassembler)
Website www.wodendesign.com
Community sites www.frugal-horn.com & www.frugal-phile.com
Old Hand
Posts: 1047
Joined: Sat Jan 26, 2013 12:08 pm

#17 Re: Hornresp query - TL design Tool

Post by vinylnvalves »

Managed to get sometime to play with Hornresp at the weekend. A little better but still not what i was expecting to get. Doesnt seem to be any affect from changing the stuffing parameters - must still be doing something wrong.
attempt2a.png (133.14 KiB) Viewed 1321 times
attempt2b.png (160.2 KiB) Viewed 1321 times
Its along way off the original concept
spiralhorn (2).png
spiralhorn (2).png (80.35 KiB) Viewed 1321 times
Post Reply