PSUD II problem
#1 PSUD II problem
Not exactly computer audio.......
I recently installed psud ii on a windows 10 machine. It was working fine until I made the results graph section wider, in fact I made it the full width. At this point, the results selector section (where you tick the boxes to select what results to plot) had completely disappeared. The problem is that I now can’t reverse that change. I can’t get the results selector to re-appear.
I’ve tried closing and restarting psud, and I’ve also tried uninstalling and reinstalling, but the display format is obviously stored somewhere ( maybe the registry)
Any suggestions of what I could try?
I recently installed psud ii on a windows 10 machine. It was working fine until I made the results graph section wider, in fact I made it the full width. At this point, the results selector section (where you tick the boxes to select what results to plot) had completely disappeared. The problem is that I now can’t reverse that change. I can’t get the results selector to re-appear.
I’ve tried closing and restarting psud, and I’ve also tried uninstalling and reinstalling, but the display format is obviously stored somewhere ( maybe the registry)
Any suggestions of what I could try?
#2 Re: PSUD II problem
All I can suggest is using this
https://docs.microsoft.com/en-us/sysint ... ds/procmon
To see where its getting the numbers from at startup.
https://docs.microsoft.com/en-us/sysint ... ds/procmon
To see where its getting the numbers from at startup.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- pre65
- Amstrad Tower of Power
- Posts: 21442
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#3 Re: PSUD II problem
Have you tried clearing your computer cache ?
Running something like CCleaner might help.
Also, would "prefetch" save settings ? If so clear that down as well.
Running something like CCleaner might help.
Also, would "prefetch" save settings ? If so clear that down as well.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#4 Re: PSUD II problem
Thanks chaps, I’ll try those suggestions
-
- Thermionic Monk Status
- Posts: 5881
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#5 Re: PSUD II problem
If all else fails Max I think Duncan contributes on DIY Audio so you might be able to PM him there???
- Mike H
- Amstrad Tower of Power
- Posts: 20307
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#6 Re: PSUD II problem
Settings should be stored either in the registry, or, by the old fashioned method, in a configuration (.ini) file.
I doubt CCleaner et al will delete them because they're associated with a bona fide installed program so are 'kosher'.
A .ini file should be in C:\Windows, else if the registry, means running regedit.exe and searching in there.
I can't look these up to check because I don't have PSUD installed.
I doubt CCleaner et al will delete them because they're associated with a bona fide installed program so are 'kosher'.
A .ini file should be in C:\Windows, else if the registry, means running regedit.exe and searching in there.
I can't look these up to check because I don't have PSUD installed.
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- Mike H
- Amstrad Tower of Power
- Posts: 20307
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#7 Re: PSUD II problem
PS: you need to either - delete it all, so program is back to first defaults, or, maybe be able to find out which setting does what and so change it as required.
HTH
HTH
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
#9 Re: PSUD II problem
Thanks Mike
I uninstalled using settings - Apps - uninstall, and then cleared out all the registry keys I could find. There weren't any .ini files but good advice to check anyway, cheers.
Then reinstalled and all back to normal again - phew
- Mike H
- Amstrad Tower of Power
- Posts: 20307
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#10 Re: PSUD II problem
OK!
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."