Oscilloscope Advice
#16 Re: Oscilloscope Advice
No problem with obtaining the user manual from the Tektronix site so a little bed time reading...
Sorry, I couldn't resist!
- jack
- Thermionic Monk Status
- Posts: 5503
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#17 Re: Oscilloscope Advice
Forgive me if you already know this and about oscilloscope techniques in general, but if not a read of an older (pre-digital) copy of the "XYZ of oscilloscopes" is a good plan.
The latest is at https://uk.tek.com/document/primer/xyzs ... pes-primer
A 1993 one is here which is probably more appropriate for your scope (the 2225 is from 1990 - a lot of the analogue stuff was cut in later editions) https://www.google.com/url?sa=t&source= ... MnHyIxQ84l
The latest is at https://uk.tek.com/document/primer/xyzs ... pes-primer
A 1993 one is here which is probably more appropriate for your scope (the 2225 is from 1990 - a lot of the analogue stuff was cut in later editions) https://www.google.com/url?sa=t&source= ... MnHyIxQ84l
Vivitur ingenio, caetera mortis erunt
#18 Re: Oscilloscope Advice
Thanks Nick. This is new territory for me so learning is required.
Sorry, I couldn't resist!
- jack
- Thermionic Monk Status
- Posts: 5503
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#19 Re: Oscilloscope Advice
...in which case the complementary document about probes may also be useful.
https://www.tek.com/document/primer/abcs-probes-primer
https://www.tek.com/document/primer/abcs-probes-primer
Vivitur ingenio, caetera mortis erunt