Power Supply Caps
#1 Power Supply Caps
Looking for 10000uf 63v caps for the Kraken, max of 40mm height, 30mm diameter. Any recommendations?
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#2
I'd avoid Ebay items from China and the far east.
How about these ?
http://uk.rs-online.com/web/p/aluminium ... s/0127543/
How about these ?
http://uk.rs-online.com/web/p/aluminium ... s/0127543/
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- jack
- Thermionic Monk Status
- Posts: 5503
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#3
That's a tight physical spec for a decent low-ESR PSU cap...
£5.35 ex VAT (but 35mm in diameter)http://uk.farnell.com/epcos/b41231b8109 ... dp/2284051
or
£4.95 ex VAT (but 45mm in height) http://uk.farnell.com/illinois-capacito ... 0000uf+63v
Farnell have absolutely no electrolytics at 30x40x10000ufx63V - they have some at 50V and below...
RS and Rapid don't have any either. The closest I found was from DigiKey (or Mouser or Newark) at 30mmx42mm - http://www.digikey.co.uk/product-detail ... ND/4465727
£5.35 ex VAT (but 35mm in diameter)http://uk.farnell.com/epcos/b41231b8109 ... dp/2284051
or
£4.95 ex VAT (but 45mm in height) http://uk.farnell.com/illinois-capacito ... 0000uf+63v
Farnell have absolutely no electrolytics at 30x40x10000ufx63V - they have some at 50V and below...
RS and Rapid don't have any either. The closest I found was from DigiKey (or Mouser or Newark) at 30mmx42mm - http://www.digikey.co.uk/product-detail ... ND/4465727
Vivitur ingenio, caetera mortis erunt
#5
Thanks Phil, 35mm diameter won't fit though.pre65 wrote:I'd avoid Ebay items from China and the far east.
How about these ?
http://uk.rs-online.com/web/p/aluminium ... s/0127543/