This was only bought a few weeks back but I have upgraded again so it is surplus to requirement
![Smile :)](./images/smilies/icon_smile.gif)
The previous owner (Ian of the Lenco Heaven forum fame) made the plinth using Delignit MU25 a beech ply similar to Panzerholz in construction but compressed by 20% instead of Panzerholz's 50%. This was 3 sheets while 2 sheets of birch ply which has the chrome pieces added (the pictures do flatter it but I think - and everyone who has seen it in the flesh - does look very smart and suits the motor unit.
Some pictures of the as TT as bought it a few weeks back, I mounted my wooden 12 inch arm and it worked pretty well but the pivot to spindle distance was not correct
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210807_193210.jpg?width=1920&height=1080&fit=bounds)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210807_193102.jpg?width=1920&height=1080&fit=bounds)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210807_193046.jpg?width=1920&height=1080&fit=bounds)
]
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210807_193015.jpg?width=1920&height=1080&fit=bounds)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210807_192945.jpg?width=1920&height=1080&fit=bounds)
I then routed out 20 mm from the top piece and made a tonearm armboard so I could get the correct pivot to spindle distance now and the turntable SQ was brilliant
![Smile :)](./images/smilies/icon_smile.gif)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210808_163731.jpg?width=1920&height=1080&fit=bounds)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210808_163706.jpg?width=1920&height=1080&fit=bounds)
Pictures as it is now - armboard created for an RB300 - again, the SQ is very good even with this arm
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210816_184317.jpg?width=1920&height=1080&fit=bounds)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210816_184256.jpg?width=1920&height=1080&fit=bounds)
![Image](https://hosting.photobucket.com/images/a373/gninnamag/IMG_20210816_184220.jpg?width=1920&height=1080&fit=bounds)
I will sell the whole TT (minus cartridge) as is (JVC TT-71, plinth and the Rega RB300) for £460 or minus the Rega for £370 (this is how much the TT owes me).
The RB300, I have owned for the last 27 years and was used on a Gyrodek I bought new but has not been in use for the last 15 years, but seems to work fairly well.
I would not like to post this due to the weight etc so prefer it to be picked up from where I live (near Leeds) - this way I can demo it and show it fully working
![Smile :)](./images/smilies/icon_smile.gif)
Cheers