Project box clear out

Caveat emptor, Caveat venditor
Post Reply
SimonC
Old Hand
Posts: 545
Joined: Mon Sep 24, 2007 11:34 am
Location: West Yorkshire

#1 Project box clear out

Post by SimonC »

I've been having a clear out in my project box and have a couple of give aways. Both these are free to a good home (or even a bad one, I'm not that fussy).

2 x delay board PCB and the pre-programmed delay chips. These were designed way back when by Nick and there is a build thread and parts list someone on the site for them. I can't remember what the delay is on these, but knowing Nick it would be something sensible and usable.
Nicks Delay Board.png
Nicks Delay Board.png (70.52 KiB) Viewed 2385 times
ALWSR reg boards x5. One of these is fully built, and the other 4 are bare boards. Can't remember where these came from so I don't know the history of the built one. It may be perfect, it may explode.
ALWSR.png
ALWSR.png (133.55 KiB) Viewed 2385 times
ALWSR2.png
ALWSR2.png (85.82 KiB) Viewed 2385 times
Drop me a line if you want to grab any of these and I'll post them out.
Cheers
Simon C
SimonC
Old Hand
Posts: 545
Joined: Mon Sep 24, 2007 11:34 am
Location: West Yorkshire

#2 Re: Project box clear out

Post by SimonC »

Found the link to Nick's delay board thread: http://www.audio-talk.co.uk/phpBB3/view ... =16&t=2796
This has the schematics and parts lists etc.
Post Reply