I was of the opinion that a permanent fault was easier to trace than an intermittent fault, so in one way you are going forward Ant.
Come back to it when the mind is more quiet.
Dual EDS 1000 and airprodigy linear arm build
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#91 Re: Dual EDS 1000 and airprodigy linear arm build
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#92 Re: Dual EDS 1000 and airprodigy linear arm build
I cant be bothered with it to be honest, there are more important things the be dealt with at the moment and its not as if im short if tts
Obsolete electronics are always abit of a gamble
Obsolete electronics are always abit of a gamble
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#93 Re: Dual EDS 1000 and airprodigy linear arm build
I believe the original Dual turntable had some sort of connection between the arm, and the motor to make sure the motor would only run if the arm was in certain positions.
Was all that removed when you did the conversion ?
Was all that removed when you did the conversion ?
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#94 Re: Dual EDS 1000 and airprodigy linear arm build
Stumbled across this EDS1000 thread on diyaudio - it links to circuit diagrams for two types of driver board for the beastie - for when you suddenly feel inspired to start checking it
https://www.diyaudio.com/forums/analogu ... motor.html
Good Luck!
James
https://www.diyaudio.com/forums/analogu ... motor.html
Good Luck!
James
#95 Re: Dual EDS 1000 and airprodigy linear arm build
This site has Dual turntable spares https://www.dualfred.de/ including plugin LED replacement strobe lights.