I've been talking to a toroidal transformer manufacturer about an 800v 400va transformer.
They have suggested that, as it's for audio use, they wind it on a 500va core, which is OK.
Question is, the transformer I might have ordered from Antec (in USA) would have had 2 x 400v secondarys, so is that way any better (or worse) than 1 x 800v secondary ?
It would be used with a hybrid bridge so a centre tap would not be needed.
Custom toroids.
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#1 Custom toroids.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#2 Re: Custom toroids.
I would check if the insulation of the windings is rated for using them in series.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- Paul Barker
- Social Sevices have been notified
- Posts: 8991
- Joined: Mon May 21, 2007 9:42 pm
#3 Re: Custom toroids.
“It would be used with a hybrid bridge so a centre tap would not be needed.”
If you used two 400 windings you have a centre tap.
The one you’re ordering you can ask for 800vct. (Centre tapped.)
Worth checking ratings and if you can’t find facts order you’re 800vct.
If you used two 400 windings you have a centre tap.
The one you’re ordering you can ask for 800vct. (Centre tapped.)
Worth checking ratings and if you can’t find facts order you’re 800vct.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein