Search found 1566 matches

by Graeme
Wed Mar 03, 2021 9:14 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Re: Phono input capacitance

That's ignoring the effect the cap may have on the generator. It may be the reducing load with frequency is damping the cart at those frequencies. In the absence on a 'like' button... Like It does feel (sound) like rather than just removing something, the cap is letting the cart behave better. The ...
by Graeme
Wed Mar 03, 2021 8:32 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Re: Phono input capacitance

Well, caps pass high frequencies. The bigger the cap the lower the frequency where it takes effect. Putting it across the + and - of a cartridge channel, just means that it is shorting high frequencies to ground with a phase shift. The output impedance for "most" DECCA cartridges is 4400 ...
by Graeme
Tue Mar 02, 2021 9:07 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Re: Phono input capacitance

Nuts, every browser can Save Page As, or do what Toppsy did. Anyway he was saying he put 10nF on his Decca cartridge to curb the shrill treble artifacts, and thought it may be specific to that one example. He also said the maths of adding that much capacitance makes no sense. Doesn't go into any mo...
by Graeme
Tue Mar 02, 2021 7:45 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Re: Phono input capacitance

The site won't allow me to copy the text, apparently showing his writing to other people is theft or something 🙄 Graeme, I have just copied the whole text of that Hagerman Technology link using the Ctrl 'c' to highlight it all then posting it into a blank page of MS Word using Ctrl 'v'. It has full...
by Graeme
Tue Mar 02, 2021 6:04 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Re: Phono input capacitance

The site won't allow me to copy the text, apparently showing his writing to other people is theft or something 🙄 Bit this is the article that made me try adding capacitance, he talks about it around 2/3rds of the way down the page. http://www.adventuresinhifiaudio.com/23/07/2010/the-decca-mk-vi-gold...
by Graeme
Tue Mar 02, 2021 6:00 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Re: Phono input capacitance

I don't really understand this, but it's becoming apparent that I could do with at least understanding it a little. Does this link help any? http://www.hagtech.com/loading.html It will certainly help me understand what should be going on, thanks. I'll read it properly after dinner. What I don't und...
by Graeme
Tue Mar 02, 2021 3:52 pm
Forum: General Vinyl
Topic: Phono input capacitance
Replies: 12
Views: 13425

Phono input capacitance

I don't really understand this, but it's becoming apparent that I could do with at least understanding it a little. Since I've had this decca cart I've been trying to tame an element of its sound by adjusting loading, effective mass, set up etc but nothing was working. It sort of sounded like it was...
by Graeme
Wed Feb 24, 2021 9:13 pm
Forum: General Vinyl
Topic: Phono stage loading
Replies: 9
Views: 10911

Re: Phono stage loading

izzy wizzy wrote: Wed Feb 24, 2021 8:27 pm Potentiometer loading
http://hifiheroin.blogspot.com/2020/05/ ... hives.html
Remote too!
by Graeme
Wed Feb 24, 2021 9:13 pm
Forum: General Vinyl
Topic: Phono stage loading
Replies: 9
Views: 10911

Re: Phono stage loading

Years ago I built a phono and used 2 no. 12 way switches to wire in 12 different load resistors per channel. And yes it did make a surprising difference. If you know the recommended range I'd be inclined to choose a range of values from a bit below to a bit above and try. Going way off will sound w...
by Graeme
Wed Feb 24, 2021 9:12 pm
Forum: General Vinyl
Topic: Phono stage loading
Replies: 9
Views: 10911

Re: Phono stage loading

Ant wrote: Wed Feb 24, 2021 7:32 pm Graeme, i have a 250k stereo stepped attenuator here, a 23 step one that is a series type if you want to try that?
Thanks for the offer, but I think I'll use my pot temporarily.
by Graeme
Wed Feb 24, 2021 7:16 pm
Forum: General Vinyl
Topic: Phono stage loading
Replies: 9
Views: 10911

Re: Phono stage loading

I have a 50k alps blue. Wondering if I can use that, with 20k in series to give the range of variability I'd like to try with this decca. I guess I could switch that 20k between being in series or in parallel to give me a suitable range for mc (I use step up transformers with mc) I guess ultimately,...
by Graeme
Wed Feb 24, 2021 6:55 pm
Forum: General Vinyl
Topic: Phono stage loading
Replies: 9
Views: 10911

Re: Phono stage loading

Using Phono plugs is an option, but I'm probably going to want to try alot of different values. I'd like to be able to vary it during play too if possible, at least for a few weeks while I get this dialled in. Every tweek I make a change to vta, arm effective mass or damping etc, it tends to go hand...
by Graeme
Wed Feb 24, 2021 6:35 pm
Forum: General Vinyl
Topic: Phono stage loading
Replies: 9
Views: 10911

Phono stage loading

Skip to the gap in text to avoid the drivel 😂 I eventually bought a new cart. I couldn't decide what to get so I did the least sensible thing and bought a used garrott microscanner decca london. It's good. However, it is very responsive to all changes. Vtf, vta, effective mass, damping, and loading!...
by Graeme
Tue Feb 09, 2021 11:04 am
Forum: General Vinyl
Topic: Ortofon cadenza blue
Replies: 9
Views: 11571

Re: Ortofon cadenza blue

I've seen the phasemation but can't find much about them online.
I'll look again.
by Graeme
Sun Feb 07, 2021 7:15 pm
Forum: General Vinyl
Topic: Ortofon cadenza blue
Replies: 9
Views: 11571

Re: Ortofon cadenza blue

The Benz is one of the few in this price range that aren't really high compliance too, so would suit both my tt/arm set ups.