Wanted: Pre-amp choke

Caveat emptor, Caveat venditor
Post Reply
little eddy
Old Hand
Posts: 604
Joined: Sun Nov 09, 2008 2:06 pm
Location: Manchester

Wanted: Pre-amp choke

Post by little eddy » Sat Apr 07, 2018 5:55 pm

Before I was going to buy one of these (because it has significantly lower DCR than the similar Hammond); http://primarywindings.com/product/10-h ... -dc-choke/ , was wondering whether anyone had a used choke they wished to recycle.

It's going to be used in a choke-fed filter, and looking for something between say 8 and 15H, and 100 to 150mA allowing for the ac current element. Above 110mA would allow me to have 20mA through each shunt regulator as I had originally intended.

Please message me if anyone has anything to offer.

Thanks in advance,

Thorens TD-125 & 'Snail' phono/pre, NAS/SBT, CS4398 DAC, Rocky KT66 amp, still messing with OBs.

Nanook of the North
Posts: 43
Joined: Sat Apr 07, 2018 4:16 pm

Re: Wanted: Pre-amp choke

Post by Nanook of the North » Sat Apr 14, 2018 7:29 pm

Okay wee Ed........

It aint a preamp choke, hell it aint even a proamp choke.

But after all this time, you deserve an answer.

So........Choiuuuughyy, Chooooooghytr, Choooooooyuhg :bounce:

Sorry but it tickled me.

Post Reply