Something stirs in the Undergrowth

Dedicated to those large boxes at one end of the room
User avatar
Ray P
No idea why I do this anymore
Posts: 6294
Joined: Thu Nov 22, 2007 5:18 pm
Location: Somerset

#2401 Re: Something stirs in the Undergrowth

Post by Ray P »

IslandPink wrote: Tue May 28, 2019 9:46 pm Everyone was surprised what was uncovered !
Maybe you should have had a metal detectorist check you over first, just in case there any hoardes of roman coins or the like secreted within...
Sorry, I couldn't resist!
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2402 Re: Something stirs in the Undergrowth

Post by IslandPink »

Well, new hearing and some re-alignment on OB's from Owston, I forge ahead.
I did some calc for the cap size in the Quasar crossover on Monday . Then I went home and put in approx. 40uF instead of the 56uF. Things got worse. Then I tried 100uF . That was fuller but not quite right .
Then I sat down and carefully looked at the roll-off of the PM6C, the roll-off of the FX120, and did a spice model including the L-pad around the Supravox and the 16R for two FX120 drivers.
Armed with that, tonight, I tried 56uF+20uF - this is much better. I will try 85uF too.

I think I made a wrong turning on this by not re-evaluating the cap size after applying the different attenuation method on the bass driver. I was just hoping the 56uF would be OK.
Now need to decide what to use for 20 or 30uF extra that will fit inside the crossover boxes... hmmm...
"Once you find out ... the Circumstances ; then you can go out"
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2403 Re: Something stirs in the Undergrowth

Post by IslandPink »

Sounding like 56+30uF is the better of the two. More upper bass tone, and the soundstage is more solid and natural. I have just ordered some 22 & 33uF bipolar Mundorf caps from HFC to see if they're good enough ( they are small enough to fit in the box with the EVO oils ) , otherwise will have to bodge later to enlarge the boxes for more PP/oil.
Anyway, feeling happier with the whole thing now.
"Once you find out ... the Circumstances ; then you can go out"
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2404 Re: Something stirs in the Undergrowth

Post by IslandPink »

Nice to have wood stacked up in the hall again - feels right.
Kornett_parts.JPG
This is the next phase of 'Plan A'. Given that 'Plan B' is more or less finished, and operational.
"Once you find out ... the Circumstances ; then you can go out"
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2405 Re: Something stirs in the Undergrowth

Post by IslandPink »

More :
Kornett_parts1.JPG
"Once you find out ... the Circumstances ; then you can go out"
SimonC
Old Hand
Posts: 545
Joined: Mon Sep 24, 2007 11:34 am
Location: West Yorkshire

#2406 Re: Something stirs in the Undergrowth

Post by SimonC »

IslandPink wrote: Sun Jul 28, 2019 10:43 pm More :

Kornett_parts1.JPG
:D :D :D :D :D
User avatar
Ali Tait
Eternally single
Posts: 4374
Joined: Fri Jun 08, 2007 8:10 pm
Location: Galashiels

#2407 Re: Something stirs in the Undergrowth

Post by Ali Tait »

Can you guess what it is yet? :D
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2408 Re: Something stirs in the Undergrowth

Post by IslandPink »

Exactly .
Double horn. Two drivers.
http://www.hm-moreart.de/101.htm
Build - one - using 5" drivers - for evaluation.
FE126eN loaned by Nick for front, 5FE120 Faital for rear.
"Once you find out ... the Circumstances ; then you can go out"
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2409 Re: Something stirs in the Undergrowth

Post by IslandPink »

More progress, either side of a mother visit -
Double_progress2.JPG
Double_progress3.JPG
Can't stop doing this neatly, now I have the experience. The big conical cutter with the roller on the end is a hoot.
"Once you find out ... the Circumstances ; then you can go out"
User avatar
Ray P
No idea why I do this anymore
Posts: 6294
Joined: Thu Nov 22, 2007 5:18 pm
Location: Somerset

#2410 Re: Something stirs in the Undergrowth

Post by Ray P »

Saw this and thought of you for some reason Mark...

https://www.diyaudio.com/forums/multi-w ... packs.html
Sorry, I couldn't resist!
Max N
Old Hand
Posts: 1453
Joined: Thu Aug 16, 2007 6:10 pm

#2411 Re: Something stirs in the Undergrowth

Post by Max N »

Very nice handiwork there
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2412 Re: Something stirs in the Undergrowth

Post by IslandPink »

Just spent about an hour puzzling over dimensions here, with a ruler and calculator. Something doesn't work out.
http://www.hm-moreart.de/101.htm
( Page 2 )
The horizontal dimensions around the bottom bends of the two horn paths ( the 53, 43, 48, 67 and the 125mm end pieces ) ultimately have an error of about 5mm when you draw everything out on the wood. Very annoying. I have had to split the difference of error into the 53mm and 43mm dimensions.
Not the first time I've had to double check things.
Weather not helping either, but I have enough variety of activities to keep me busy indoors as well as outdoors.
"Once you find out ... the Circumstances ; then you can go out"
User avatar
izzy wizzy
Old Hand
Posts: 1496
Joined: Fri Nov 02, 2007 7:02 pm
Location: Auckland NZ
Contact:

#2413 Re: Something stirs in the Undergrowth

Post by izzy wizzy »

You've probably looked at this but there seem to be some angles involved in those bends so are some of these measurements involving diagonals and that's where your 5mm is when translated to flat bits of wood?

Cheers,
Stephen
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2414 Re: Something stirs in the Undergrowth

Post by IslandPink »

I have had a very good look at it. The panel at the back ( front face of the rear horn mouth ) is about 5.5°, so that one is in the calc coming up from the bottom panel. Elsewhere the corrections are things like the cosine of 1.5° which is so close to 1.0 , it does nothing.
Anyway, it has all been drawn out on the side panel accurately with the 13mm and 18mm thicknesses all respected as close as possible. I also measured my birch ply, and it IS 18mm !
So I do think there are errors. I have already had to correct some piece lengths by up to 3mm from the listed parts. None of this will affect the acoustic behaviour of the horn much, given the wavelength at 300Hz, where the horn tails off, but it's more about getting all the wood to fit together and be airtight.
It's not as difficult as the last horn project I did, that's for sure !
"Once you find out ... the Circumstances ; then you can go out"
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#2415 Re: Something stirs in the Undergrowth

Post by IslandPink »

IslandPink wrote: Sat Aug 10, 2019 4:57 pm I also measured my birch ply, and it IS 18mm !
:oops: Well I measured it again, and it's 17.5mm ... so this accounts for 2mm out of the 6mm discrepancy.

Meanwhile more progress. Have to call a temporary halt now, owing to visitors next weekend !
Double_more.JPG
"Once you find out ... the Circumstances ; then you can go out"
Post Reply