Remember These?
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#526 Re: Remember These?
Is this going to Owston?
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#527 Re: Remember These?
Providing it doesn't blow up before the beginning of June, it'll be going to Owston.
I think it is the bees knees, but then I would wouldn’t I.
I've got a little idea to do with the Fanes too; an idea which Steve S suggested might have potential, last time I visited him.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#528 Re: Remember These?
We might have some good and interesting stuff for this fest.
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#529 Re: Remember These?
Aye, just a bit more to do with the cosmetics of the top plate before Owston. All them bolt heads give me the willies.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#530 Re: Remember These?
I hope they are all in line with each other ?Cressy Snr wrote: ↑Sat Apr 13, 2019 9:39 am
Aye, just a bit more to do with the cosmetics of the top plate before Owston. All them bolt heads give me the willies.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#531 Re: Remember These?
That's the trouble, they are in a random pattern when seen from above the top plate. Maybe I'll embrace chaos and not cover them with a flat piece of aluminium.pre65 wrote: ↑Sat Apr 13, 2019 12:01 pmI hope they are all in line with each other ?Cressy Snr wrote: ↑Sat Apr 13, 2019 9:39 am
Aye, just a bit more to do with the cosmetics of the top plate before Owston. All them bolt heads give me the willies.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#532 Re: Remember These?
KISS.Cressy Snr wrote: ↑Sat Apr 13, 2019 1:06 pm
That's the trouble, they are in a random pattern when seen from above the top plate. Maybe I'll embrace chaos and not cover them with a flat piece of aluminium.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#533 Re: Remember These?
Had the amp on the 'scope earlier this afternoon and have managed to further tweak up the squarewave response. I mean, it needs to be on its best behaviour for Owston n' est ce pas? Have changed out the 10K carbon comp grid stoppers for 2K2. This has given sharper corners on both the leading and trailing edges of the 1KHz and 10KHz traces.
Was highly wary of oscillation with these valves because of the high 35mA/V gm so I limited the bandwidth with the larger resistors, but I've taken the scope out as far as it will go and am not seeing anything untoward with the 2K2 stoppers.
A nice bit of filigree treble detail and quicker leading edge definition has emerged from wherever it was hiding, so the scope exercise was worth doing. I'm getting to like test equipment a lot.
So output stage grid stoppers should now be 2K2 or maybe the 1Ks that MJ uses.
Was highly wary of oscillation with these valves because of the high 35mA/V gm so I limited the bandwidth with the larger resistors, but I've taken the scope out as far as it will go and am not seeing anything untoward with the 2K2 stoppers.
A nice bit of filigree treble detail and quicker leading edge definition has emerged from wherever it was hiding, so the scope exercise was worth doing. I'm getting to like test equipment a lot.
So output stage grid stoppers should now be 2K2 or maybe the 1Ks that MJ uses.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#534 Re: Remember These?
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#535 Re: Remember These?
Just a note about grid stoppers for Ray.
I put a wire link in the 10K position on the driver PCB and put the grid stopper resistors right up against the grid pin on the septar socket.
I put a wire link in the 10K position on the driver PCB and put the grid stopper resistors right up against the grid pin on the septar socket.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
#537 Re: Remember These?
I very much doubt that.they are in a random pattern when seen from above the top plate
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#538 Re: Remember These?
Allright, so I was exaggerating!
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#539 Re: Remember These?
Took the carbon comp grid stopper values down from 2K2, to 1K this afternoon, as I found a couple whilst rummaging in the parts boxes and thought I’d give them a whirl. The sound has gone up another notch.Cressy Snr wrote: ↑Sat Apr 13, 2019 3:15 pm
.....So output stage grid stoppers should now be 2K2 or maybe the 1Ks that MJ uses.
As did Wolfgang, with his 6C33C based amp, I’ve found that this single ended OTL amplifier is highly responsive to slight component changes; much more so than anything else I’ve built.
Interesting.....
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10579
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#540 Re: Remember These?
Spending the next few hours, painting individually, each top surface bolt head on the mains transformer side of the output valves. I tried making a plate to cover the bolt heads but it looked like crap. That’s me occupied and out of mischief then.
Sgt. Baker started talkin’ with a Bullhorn in his hand.