Finished and working - 12 valve all DHT PP 26-71a-45

If they glow, this is the place to be
steve s
Shed dweller
Posts: 2829
Joined: Wed May 30, 2007 6:19 pm
Location: east yorks

#256 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by steve s »

I would have loved to hear it but I'm busy most weekends this month
Well done on getting it sorted.. roll on the next build !!!
If your still up for bringing it across to mine in February your welcome..
The tube manual is quite like a telephone book. The number of it perfect. It is useful to make it possible to speak with a girl. But we can't see her beautiful face from the telephone number
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#257 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by IslandPink »

So pleased it's worked out. I remember how it was when I first got the PP 300B working - eye-opener !
"Once you find out ... the Circumstances ; then you can go out"
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#258 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

We've designed the PSU and amp to mount on industrial rollers into the cupboard. M8 rod connects the layers. The top dome nuts can be removed, connecting nuts and rods then allow the amp to be turned upside down protecting the valves, so I can get to the insides. Works well. Here it is in maintenance mode.
1547413483666282.jpg
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#259 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

steve s wrote: Sun Jan 13, 2019 8:18 pm I would have loved to hear it but I'm busy most weekends this month
Well done on getting it sorted.. roll on the next build !!!
If your still up for bringing it across to mine in February your welcome..
The hum has been tamed. If I kill the buzz by then I'd love to bring it over. Or you bring your speakers here.
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#260 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

Interesting.

- removed rectifiers for 26 & 71A valves
- removed 26 & 71A valves (so no heater noise)
- grounded the 45 grids with clip leads

Design reminder following the simplifications ...
PSU.PNG
Left channel was silent 1 foot away from speaker (Lowther DX4), small buzz with ear next to it. 30uF cap bypassing cathode stopped that buzz dead. Unclip it and the slight buzz returns, clip on and it goes, very clear.

Right channel was silent.

So I measured the valves.

Left : Vgk = 47v, Vak = 245v, Valve current measured across 10R were 31.6 & 26.2 mA
Right : Vgk = 47v, Vak = 250v, Current = 32.4 & 25.7mA

So I swapped the outside valves figuring to make two closer matched pairs. The mA stayed mismatched, the voltages changed slightly, but most interestingly unclipping the bypass cap now makes zero difference on the left channel. Both channels completely silent - in fact I went back to check they were still on, even though I'd just measured voltages. Measurements after swapping the valves below.

Left : Vgk = 48v, Vak = 249v, Valve current measured across 10R were 31.1 & 27.1 mA
Right : Vgk = 48v, Vak = 253v, Current = 33.2 & 25.6mA
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#261 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

99% of the buzz had been killed. 30uF caps across the 26 cathode resistors killed the hum, the buzz turned out to be valve mismatches.

From the sofa I can BARELY tell the system is on.

Listening to the same album I heard at lunchtime, on same volume, everything is blacker and more atmospheric.

I'm so happy I might cook tea.
User avatar
izzy wizzy
Old Hand
Posts: 1496
Joined: Fri Nov 02, 2007 7:02 pm
Location: Auckland NZ
Contact:

#262 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by izzy wizzy »

RhythMick wrote: Mon Jan 14, 2019 6:00 pm 99% of the buzz had been killed. 30uF caps across the 26 cathode resistors killed the hum, the buzz turned out to be valve mismatches.

From the sofa I can BARELY tell the system is on.

Listening to the same album I heard at lunchtime, on same volume, everything is blacker and more atmospheric.

I'm so happy I might cook tea.
Happy it's worked out well for you. I know only too well how frustrating these "simple" amps can be.

Cheers,
Stephen
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#263 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

Everyone who has helped and supported, welcome to beer food and accommodation here any time you need or want it
User avatar
Ray P
No idea why I do this anymore
Posts: 6292
Joined: Thu Nov 22, 2007 5:18 pm
Location: Somerset

#264 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by Ray P »

I see you use Lowthers; maybe from the sublime to the ridiculous for your next project with a 6C33C or 13E1 SE-OTL build?
Sorry, I couldn't resist!
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#265 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

Ray P wrote: Mon Jan 14, 2019 10:40 pm I see you use Lowthers; maybe from the sublime to the ridiculous for your next project with a 6C33C or 13E1 SE-OTL build?
Yeah I've been watching those threads with interest.

I definitely want to bring this system to Owston. I want someone else to have a listen and tell me is not just my biased imagination.
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#266 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by IslandPink »

Which Lowthers do you use and how are they employed ?
"Once you find out ... the Circumstances ; then you can go out"
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#267 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

We bought Icon Audio cabs (folded horn in a tower with a rear exit for the bass) with DX2 units originally, since upgraded to DX4.

Geoff just recently bought and built 15" subs which replaced the B&W 610 units we previously used. We have 2 each and they integrate really smoothly. I'll get the details from Geoff.
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#268 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

We bought Icon Audio cabs (folded horn in a tower with a rear exit for the bass) with DX2 units originally, since upgraded to DX4.

Geoff just recently bought and built 15" subs which replaced the B&W 610 units we previously used. We have 2 each and they integrate really smoothly. I'll get the details from Geoff.
User avatar
Ray P
No idea why I do this anymore
Posts: 6292
Joined: Thu Nov 22, 2007 5:18 pm
Location: Somerset

#269 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by Ray P »

RhythMick wrote: Tue Jan 15, 2019 12:15 am We bought Icon Audio cabs (folded horn in a tower with a rear exit for the bass) with DX2 units originally, since upgraded to DX4.

Geoff just recently bought and built 15" subs which replaced the B&W 610 units we previously used. We have 2 each and they integrate really smoothly. I'll get the details from Geoff.
Do you have the 15ohm DX4s?
Sorry, I couldn't resist!
RhythMick
Old Hand
Posts: 747
Joined: Fri Jun 23, 2017 12:24 pm

#270 Re: Finished and working - 12 valve all DHT PP 26-71a-45

Post by RhythMick »

No 8ohm, wish we'd opted for 15
Post Reply