DHT Heater using VCCS - PCB or Kit (Possible Group buy)
#1006 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#1007 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Thanks.
Another fail from Google !
Another fail from Google !
"Once you find out ... the Circumstances ; then you can go out"
#1008 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Mark, I've got a also got few spares, if you need them.
Andrew
Andrew
Analogue, the lost world that lies between 0 and 1.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#1009 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Thanks - another 8 would be handy for two more boards. Will you be at Owston ?
"Once you find out ... the Circumstances ; then you can go out"
#1010 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
I bought 3 syringes of thermal grease ... no idea why, I can't see me getting through 1.
https://uk.rs-online.com/web/p/thermal- ... 3732323926
I'll bring the other 2 to Owston, anyone who can use them is welcome. Actually I wonder what other surplus I can dump on somebody, I mean I wonder who else might benefit from my treasure trove of goodies ...
https://uk.rs-online.com/web/p/thermal- ... 3732323926
I'll bring the other 2 to Owston, anyone who can use them is welcome. Actually I wonder what other surplus I can dump on somebody, I mean I wonder who else might benefit from my treasure trove of goodies ...
#1011 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Planning to be there.IslandPink wrote: ↑Tue Jun 12, 2018 8:32 am Thanks - another 8 would be handy for two more boards. Will you be at Owston ?
Andrew
Analogue, the lost world that lies between 0 and 1.
#1012 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Those remaining are:
Neal : 4 x large
Michael L 2 x large
Neal are you planning on being at Owston?
thanks,
Andrew
Neal : 4 x large
Michael L 2 x large
Neal are you planning on being at Owston?
thanks,
Andrew
Analogue, the lost world that lies between 0 and 1.
#1013 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Experimenting with something separate, my caps were all at my brothers so I used one of the 5600uF caps supplied with the DC boards. So THAT's what a blown capacitor looks (and smells) like.
No harm done and all valuable lessons. Andrew could you give me a link to the ones supplied please so I can check the datasheet and see where I went wrong ? I take it any 105degC 16v 5600uF cap will be fine ? I'll get some spares too.
This one ok ?
https://uk.rs-online.com/web/p/aluminiu ... s/7396800/
No harm done and all valuable lessons. Andrew could you give me a link to the ones supplied please so I can check the datasheet and see where I went wrong ? I take it any 105degC 16v 5600uF cap will be fine ? I'll get some spares too.
This one ok ?
https://uk.rs-online.com/web/p/aluminiu ... s/7396800/
#1014 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Hi Mick,
I wont' ask what happened. You really need Panasonic FR Series, high ripple, not cheap but worth it.
cheers,
Andrew
I wont' ask what happened. You really need Panasonic FR Series, high ripple, not cheap but worth it.
cheers,
Andrew
Analogue, the lost world that lies between 0 and 1.
#1016 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Ok I've built all my boards for the new amp (4 small, 8 large) and am testing them now.
All good, but one board takes forever to reach the value. The others are all perhaps 20 seconds, but this one I timed (patiently) and recorded the values over a lengthy period. Aiming for 5v, after about 5 minutes it's at 4.78v, about 90 minutes later it gets to 5v. It seems to stabilise eventually.
Any clues where to look for issues?
UPDATE: when targeting 1.5v or 2.5v it's fine, just 5v it struggles with. Also the led is lit green, though not bright, whereas I can't tell the others are on.
All good, but one board takes forever to reach the value. The others are all perhaps 20 seconds, but this one I timed (patiently) and recorded the values over a lengthy period. Aiming for 5v, after about 5 minutes it's at 4.78v, about 90 minutes later it gets to 5v. It seems to stabilise eventually.
Any clues where to look for issues?
UPDATE: when targeting 1.5v or 2.5v it's fine, just 5v it struggles with. Also the led is lit green, though not bright, whereas I can't tell the others are on.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#1017 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Interesting. I can't offer the advice you need, but I remember quizzing Andrew and DavetB about how dim the green LED was on one of my boards when I had ( another) problem - we all agreed that it's barely visible in daylight - so if you have one brighter , maybe that is significant.
"Once you find out ... the Circumstances ; then you can go out"
- Dave the bass
- Amstrad Tower of Power
- Posts: 12276
- Joined: Tue May 22, 2007 4:36 pm
- Location: NW Kent, Darn Sarf innit.
#1018 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Yups, its used as a voltage ref IIRC, not an indicator as such.
"The fat bourgeois and his doppelganger"
#1019 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
No actually even targeting 2.5v it's slow to rise, just less noticeable. After about 10 minutes it gets to 2.44v. Temperature of both D44H11 & LD1085P are stable (around 44 & 54 deg C respectively, bolted to a 3mm copper sheet).
To be honest I could live with it, but I don't like things not being right.
To be honest I could live with it, but I don't like things not being right.
#1020 Re: DHT Heater using VCCS - PCB or Kit (Possible Group buy)
Problem solved.
I realised the 2 boards I want happy with were the first board I built, and I'd never built a PCB before that. Sure enough there were some joints I was less than happy with. Reworked those and all is well.
I've now built 24 of these boards (16 large, 4 small) and I'd like to think I'm much better now. Think that proves it. All have been tested with resistors simulating 26, 71A & 45 heaters.
Thanks for the support and advice.
I realised the 2 boards I want happy with were the first board I built, and I'd never built a PCB before that. Sure enough there were some joints I was less than happy with. Reworked those and all is well.
I've now built 24 of these boards (16 large, 4 small) and I'd like to think I'm much better now. Think that proves it. All have been tested with resistors simulating 26, 71A & 45 heaters.
Thanks for the support and advice.