Hi!
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#2 Re: Hi!
Welcome !
Tell us something about your amps & interests if you get time.
Tell us something about your amps & interests if you get time.
"Once you find out ... the Circumstances ; then you can go out"
#3 Re: Hi!
Hi.
My A system:
Speakers: Tannoy Monitor Gold 15"
Amplifier: NAT SE1 with 211 and DIY SET 4P1L in pentode mode with 300B
Preamp: Intact Audio TVC and Bartola 4P1L in triode mode
Phono: Shishido LCR Phono
DAC: Lampizator Amber
Turntable: EMT 930st with 12" Schick tonearm and SPU Gold
R2R: Studer A810 and Studer A807
My B system:
Speakers: JBL L112
Amplifier: Sony VFET TA-7FB
Digital: Squeezebox Touch
Turntable: Technics 1210 MKII with Denon DL109
Cassette Deck: Nakamichi 680ZX
My A system:
Speakers: Tannoy Monitor Gold 15"
Amplifier: NAT SE1 with 211 and DIY SET 4P1L in pentode mode with 300B
Preamp: Intact Audio TVC and Bartola 4P1L in triode mode
Phono: Shishido LCR Phono
DAC: Lampizator Amber
Turntable: EMT 930st with 12" Schick tonearm and SPU Gold
R2R: Studer A810 and Studer A807
My B system:
Speakers: JBL L112
Amplifier: Sony VFET TA-7FB
Digital: Squeezebox Touch
Turntable: Technics 1210 MKII with Denon DL109
Cassette Deck: Nakamichi 680ZX
-
- Thermionic Monk Status
- Posts: 5652
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#4 Re: Hi!
Some very nice stuff there
#5 Re: Hi!
Neskor,
Yes, a very nice collection of equipment.
How is your Bartola 4P1L preamplifier. I have read a lot of good things about these. Do you have any problems with it being microphonic?
Yes, a very nice collection of equipment.
How is your Bartola 4P1L preamplifier. I have read a lot of good things about these. Do you have any problems with it being microphonic?
- andrew Ivimey
- Social Sevices have been notified
- Posts: 8318
- Joined: Mon Jun 11, 2007 8:33 am
- Location: Bedford
#6 Re: Hi!
Welcome! My 4p1ls are still in their wrappers.
Philosophers have only interpreted the world - the point, however, is to change it. No it isn't ... maybe we should leave it alone for a while.
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#7 Re: Hi!
Welcome, I sold on my 4p1l some time ago.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#8 Re: Hi!
Yes, and that is a main problem when dealing with small signals.
It will sing ziiiing if your amplifier is with 1V input sensitivity otherwise it will be OK.
I'm using that preamp right now as my headphone amp with my HD600 without any problem.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#9 Re: Hi!
Some great equipment there. Are you driving the 300B with 4P1L in pentode mode ? If so , we should form a special club ( of 2) unless you know anyone else. It's the best combination I've tried, after more than 15 years of building SE amps.
"Once you find out ... the Circumstances ; then you can go out"
#10 Re: Hi!
Yes, in pentode mode.IslandPink wrote: ↑Fri May 04, 2018 5:30 pm Some great equipment there. Are you driving the 300B with 4P1L in pentode mode ? If so , we should form a special club ( of 2) unless you know anyone else. It's the best combination I've tried, after more than 15 years of building SE amps.
Great transparency and 3D sound, only drawback is missing mid bass.
I would also try 10Y IT 300B with LL7903 as input transformer. That should be a killer
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#11 Re: Hi!
Maybe, but what about the inductance of the IT , won't that potentially leave the low bass a bit lacking ?
I had a 3-stage Ecc40 > d.c. into > 45 ( choke-loaded ) into 300B and I didn't like it quite as much as the current amp.
What frequencies are your 'mid bass', people have different definitions ?
Interesting to talk...
What cabs for the Tannoys ?
I had a 3-stage Ecc40 > d.c. into > 45 ( choke-loaded ) into 300B and I didn't like it quite as much as the current amp.
What frequencies are your 'mid bass', people have different definitions ?
Interesting to talk...
What cabs for the Tannoys ?
"Once you find out ... the Circumstances ; then you can go out"
#12 Re: Hi!
Cabs are custom made, around 150L, bass reflex.
Before this I had a D3 in triode mode IT to 300B, but this configuration with 4P1L sounds much better.
I need to try that 10Y IT 300B and after I will decide which configuration I will keep.
Mid bass for me is probably around 100 - 300 Hz. Piano on some notes sounds thin, no full bodied.
Before this I had a D3 in triode mode IT to 300B, but this configuration with 4P1L sounds much better.
I need to try that 10Y IT 300B and after I will decide which configuration I will keep.
Mid bass for me is probably around 100 - 300 Hz. Piano on some notes sounds thin, no full bodied.
-
- Thermionic Monk Status
- Posts: 5652
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#13 Re: Hi!
I've had a breadboard on the go for nearly 12 years now which ended up as 26 RC 10Y IT 300BXLS. There's a thread here somewhere. Very nice. I struggled to get the IT quiet unless the PS was remote though.
But one of the 300Bs had an accident at Christmas . And I much prefer GM70s anyway so not sure if I'll get back to 10Y IT 300B.
But one of the 300Bs had an accident at Christmas . And I much prefer GM70s anyway so not sure if I'll get back to 10Y IT 300B.
#14 Re: Hi!
Hi Neskor, welcome
I see you have a legendary TA-F7B...consider me envious. From all reports of the SITs in general it's top of my list of 'want to have a listen'. Unfortunately they're so thin on the ground it's unlikely ever to happen. I have 1 pair of the 2sk/2sj in the bit box somewhere but never got round to using them as there didn't seem any point making 1 channel.
I see you have a legendary TA-F7B...consider me envious. From all reports of the SITs in general it's top of my list of 'want to have a listen'. Unfortunately they're so thin on the ground it's unlikely ever to happen. I have 1 pair of the 2sk/2sj in the bit box somewhere but never got round to using them as there didn't seem any point making 1 channel.
There's nowhere you can be that isn't where you're meant to be
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#15 Re: Hi!
Thanks - interesting. That's a tricky area - certainly for most speakers.
I don't feel I have a problem there with my amp, but I'm always open to advice.
What are you using for the DHT/DHP filament supplies ?
We did a fairly long development on current-sourced filament supplies, and found you could lose tone & body in almost any part of the frequency spectrum if you didn't get the circuit or the component choice correct. You might want to read a few pages of this -
http://www.audio-talk.co.uk/phpBB3/view ... =11&t=4729
...but I wouldn't stop anyone building 10Y>IT>300B, that sounds nice.
"Once you find out ... the Circumstances ; then you can go out"