Next owston meet ?

[pre65]

[quote="jack"]
Its a long drive

220 miles (approx), nothing for a fit squash player.

I'm going to a funeral in West Yorkshire tomorrow, 180 miles each way. Going early and coming back late.

No sweat, and I'm OLD.

PS When I go to Owston I go via Lincoln and Barnetby le Wold, and that is about 220 miles as well.

[Greg]

No sweat, and I'm OLD.

Yes. Please take the mothballs out of your pockets before you leave this time and make sure your nurse stays away from Mr The Bass

[pre65]

No sweat, and I'm OLD.

Yes. Please take the mothballs out of your pockets before you leave this time and make sure your nurse stays away from Mr The Bass

I'll try and remember.

I'll also try to remember to fit a clean pad.

[Mike H]

Too much information!

[jack]

Too much information!

Beat me to it

[Max N]

Hello Max, great to read you here again. Very much looking forward to catching up with you on the Saturday.

Cheers Greg
Very much looking forward to catching up with you and everyone else - it's been too long!

[Neal]

Who are you?

[Cressy Snr]

I need to have a valve clearout so I'll be bringing a few to Owston.

2x Japanese 813 with carbon plates. (never used)

2 x 801A (RCA about 50 hours use) Reserved

2 x 6B4G (USA about 100 hrs use) Reserved

4 x Mazda AC/P1 (globe, about 80 hrs use)

2 x Mazda AC/P (globe, never used)

4 x Marconi ML6 (ST shape, white ceramic base, about 100 hrs use)

2 x Cossor 41MTL mesh plate (ST shape about 50 hrs use ) Reserved

2 x Osram 6P25 (about 50 hrs use)

1 x Siemens CCa (Special quality ECC88 about 50 hrs use)

2 x Brimar 6SN7 - black glass ( about 20 hours use)

I'll price these up later, but I won't be asking silly money.
Is there enough interest to bring them? If not I won't take up space in the car with them.

[Andrew]

Could you bring the 6B4G, please, price depending etc.

Andrew

[thomas]

Hi likewise the 801a's please….
Thanks

[Paul Barker]

41mtl pls

[mf 1000]

I have a few valves that I'll bring and open to offers on

1 pair Psvane T Series Mark II 12 ax7's

1 pair Electro Harmonix 12ax7's

Shugang 274b

Psvane WE 274b

all low use

[jack]

I have an interesting selection of sub-miniature "rocket" pencil valves - good to 1000G some of them (yes, one thousand G). Designed for use in rockets & artillery shells but excellent sonically too - these are the absolute pinnacle of valve technology - the very best military-spec devices... they'll take a 450G impact and not fail Quantities from low 10s to several 100s of each. Make excellent pre-amps, head-fi & small desktop power amps. Also, all these tubes go through a completely ridiculous acceptance test which would destroy any normal valve...

[pre65]

I've got a couple of 5744 in my TDA1541 dac.

Are they classed as nu-vista valves ?

[jack]

I've got a couple of 5744 in my TDA1541 dac.

Are they classed as nu-vista valves ?

No. They're all wire-ended.