Page 723 of 1096

#10831 Re: Nothing In Particular

Posted: Sat Nov 23, 2019 6:16 pm
by Mike H
I'm messing with a little microprocessor board I've been putting together, and tried powering it up for the first time today. It promptly blew the 0.5 A on-board fuse. :shock: Can't find any obvious shorts. Tried "forcing" it with a croc lead bridging across the blown fuse. Fortunately I'm using a bench power supply possessing both an Ammeter AND current limiting, which, very usefully, works down to tens of milliamps, or less. (! :shock: )

The chip's booted up so must be working, ditto the 78L05 regulator etc. Correct Voltages. Neither are getting hot. There's a ULN2003 driver for output, not hot either. Yet it's pulling nearly 1 Amp. I decided to let it have more current and see if anything starts smoking.

Yep! An electrolytic, on the 12V supply input. Wrong polarity!

Image

#10832 Re: Nothing In Particular

Posted: Thu Nov 28, 2019 9:11 am
by jack
Almost there!
Electrics all done. Carpet laid (hard wearing carpet tiles). IKEA shelving and tables being moved in. Walls all painted, windows stained, old rotten door frames removed and new ones made. Still have to make new cellar "stable style" ledged and braced door next week but not needed today - it's 7' x 4' x 1" so a fair bit of timber.

Lighting now all LED - warm white in office areas, cool white in workshop bits.

Got a mate who is a c&g electrician examinar coming in to check my wiring.

Office is warm and dry.
IMG-20191127-WA0005-960x540.jpeg

#10833 Re: Nothing In Particular

Posted: Thu Nov 28, 2019 12:33 pm
by Ant
Had an odd couple of problems on tuesday with the system. Suddenly a load of hum, loads of odd buzzing regardless of input selected, and a seemingly knackered dynavector dv20a2.

I was most purterbed. I'd pulled the preamp out to test a build I'd just finished, and after this tested fine put the usual one back in. Thought id listen to some stuff on the lenco rather than the jvc and hit all the issues. Including a dead channel on the dv.

Thought it was the little switch box for the decks so I took that out first. No change. Could it be the arm cable? Pulled that out and stuck a meter on it, not that. Touching the cart body or even the stylus gave a nasty loud hum so I pulled the arm wand out (it's supposed to come out BTW) and checked continuity from the internal sprung pins to the plugs, and the earth. All fine. Checked the arm wand wiring and that was fine too. Took the cart off and put the sl15 in instead and we were back to 2 channels........ So I was now even more perturbed.

I still had a load of hum on all inputs to go with this, so I pulled the lot apart and redid all the cables, swapping the various bits of old shite out for some I made from bandridge mic cable. These are all shielded cables instead of whatever was in before. I really need a new cable loom...

Upshot was much reduced hum, but it was still there.
Come to use it this morning and it's silent again. I also checked the cart for coil continuity and that is fine with the coils measured dcr less than 1r different. Which is nice. Stuck it in a headshell and put it in the jvc and it works fine.........

So what was going on on Tuesday, I have no idea tbh.
A ghost in the machine.... And a lot of pulled out hair.

#10834 Re: Nothing In Particular

Posted: Thu Nov 28, 2019 9:01 pm
by IslandPink
Poltergeist !

#10835 Re: Nothing In Particular

Posted: Thu Nov 28, 2019 10:51 pm
by Mike H
Very VERY dirty mains?

@ Nick: seriously impressive. :thumbleft:

#10836 Re: Nothing In Particular

Posted: Fri Nov 29, 2019 7:20 am
by Max N
jack wrote: Thu Nov 28, 2019 9:11 am Almost there!
Electrics all done. Carpet laid (hard wearing carpet tiles). IKEA shelving and tables being moved in. Walls all painted, windows stained, old rotten door frames removed and new ones made. Still have to make new cellar "stable style" ledged and braced door next week but not needed today - it's 7' x 4' x 1" so a fair bit of timber.

Lighting now all LED - warm white in office areas, cool white in workshop bits.

Got a mate who is a c&g electrician examinar coming in to check my wiring.

Office is warm and dry
Well done Nick, very inspirational. Thanks for posting the progress reports.
I’ll be making a start this weekend on trying to rescue my shed before it falls down.

#10837 Re: Nothing In Particular

Posted: Mon Dec 02, 2019 6:53 pm
by Dave the bass
Nearly ran out of temperature here today, only 200 mC's left. Phew, that was close.

Image

#10838 Re: Nothing In Particular

Posted: Mon Dec 02, 2019 7:32 pm
by IslandPink
"Luxury !"
You see this cloud-sea filling the vale of Clwyd yesterday afternoon ? - it all froze on my car :confused3:
Cloud_sea_2_i.JPG
Cloud_sea_5_ii.JPG

#10839 Re: Nothing In Particular

Posted: Mon Dec 02, 2019 8:24 pm
by Dave the bass
Thats Hobbit territory innits?! Looks like it.

#10840 Re: Nothing In Particular

Posted: Tue Dec 03, 2019 4:40 pm
by jack
Getting closer...
IMG_20191203_163654-1088x816.jpg

#10841 Re: Nothing In Particular

Posted: Tue Dec 03, 2019 6:28 pm
by Dave the bass
Hobbits house!

#10842 Re: Nothing In Particular

Posted: Tue Dec 03, 2019 6:33 pm
by jack
Dave the bass wrote: Tue Dec 03, 2019 6:28 pm Hobbits house!
I'm not the one with hairy feet and a dodgy barnet, Mr. B :)

I can just get an 8x4 sheet of wood into the cellar, where I can render it into whatever's needed. Just one million times more convenient than having to wait for a dry day and then assemble everything outside in the garden.

I may or may not be onto something here, but I do believe indoors is the way to go. Yay!

#10843 Re: Nothing In Particular

Posted: Tue Dec 03, 2019 8:44 pm
by Mike H
Very cosy looking! A scene right out of Wind In The Willows

#10844 Re: Nothing In Particular

Posted: Wed Dec 04, 2019 1:54 pm
by Ant
Oh dear... The 3009 needs a rewire.....
Thought I could just get away with doing a phono socket conversion, but the blue wire has a break in it somewhere. Piggin ell. At least it's a fairly easy job with one of these

#10845 Re: Nothing In Particular

Posted: Wed Dec 04, 2019 9:30 pm
by IslandPink
Bad luck .

Meanwhile, this is the type of tailored advertising I'm seeing now when I go on MSN news :
Ad_targeted.JPG
Ad_targeted.JPG (23.78 KiB) Viewed 4273 times