Capaicitors
#1 Capaicitors
Would there be any advantage in replacing a standard electrolytic
capacitor in a cathode bias output stage with non polarised electrolytic type.
Acorn
capacitor in a cathode bias output stage with non polarised electrolytic type.
Acorn
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#2
Not unless you can get a Black Gate NH !
You might try an ansar PP if you can get the value you need in a reasonable size.
You might try an ansar PP if you can get the value you need in a reasonable size.
"Once you find out ... the Circumstances ; then you can go out"
-
- Thermionic Monk Status
- Posts: 5649
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#3
There was a thread on DIY Audio about just this subject a few weeks ago. Some were adamant they could hear a difference, others maintained that a difference can only be heard if the design wasn't a good one. And so the argument went around. And around. And around.
I've never tried the same values of lytics and PP as cathode bypasses so don't know. And if I did hear a difference, my design would be inadequate anyway .
I've never tried the same values of lytics and PP as cathode bypasses so don't know. And if I did hear a difference, my design would be inadequate anyway .
#4
Given the potential tolerance of electrolytics, without measuring and matching, I don't think you can say if they were the same value anyway.I've never tried the same values of lytics and PP as cathode bypasses so don't know. And if I did hear a difference, my design would be inadequate anyway
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#5
The problem as I see it is the quality of caps available as non-polarised is doubtful anyway - I'm not aware of any above 'base level' that are currently available.
However, am I right that you can construct a non-polar cap from two ordinary electrolytics ?
- In which case it would be well worth trying - to see if there were any phase issues related to inductance that might be cancelled .... like I found at various stages in the DHT heater project. ( and the Audio Note advice on black gate usage for cathode by-pass .. ) Maybe we are missing an obvious cheap tweak
If some people on DIY Audio heard a difference then we might discount the 'average' conclusion from there, as it will be heavily weighted by the typical bozos who inhabit that place !
However, am I right that you can construct a non-polar cap from two ordinary electrolytics ?
- In which case it would be well worth trying - to see if there were any phase issues related to inductance that might be cancelled .... like I found at various stages in the DHT heater project. ( and the Audio Note advice on black gate usage for cathode by-pass .. ) Maybe we are missing an obvious cheap tweak
If some people on DIY Audio heard a difference then we might discount the 'average' conclusion from there, as it will be heavily weighted by the typical bozos who inhabit that place !
"Once you find out ... the Circumstances ; then you can go out"
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#6
Only one way to find out, get a bunch of different brands / types and try them
Just to confuse the issue further, I did mention elsewhere that my stereo 6V6 SE amp sounded shite compared to the original AM wireless amp (identical design it was based on), only main difference as far as I can see is the 'lytics. The wireless amp uses 30 year old non-polarised 'lytics from Maplin (originally) for cathode bypass (both stages). The stereo version had Panasonic FC and the treble is way too OTT.
Just to confuse the issue further, I did mention elsewhere that my stereo 6V6 SE amp sounded shite compared to the original AM wireless amp (identical design it was based on), only main difference as far as I can see is the 'lytics. The wireless amp uses 30 year old non-polarised 'lytics from Maplin (originally) for cathode bypass (both stages). The stereo version had Panasonic FC and the treble is way too OTT.
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- jack
- Thermionic Monk Status
- Posts: 5504
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#7
Absolutely - two ordinary electrolytic capacitors in series + to + or - to - will do the trick nicely - obviously the rules regarding caps in series come into play - the total capacitance will be halved (assuming both caps are the same value), the ESR will be doubled (sum of both caps) as will the parasitic inductance which can lead to "interesting" side effects, and leakage will be (possibly much) greater. Each cap must be rated at at least the full voltage swing.IslandPink wrote:However, am I right that you can construct a non-polar cap from two ordinary electrolytics ?
Vivitur ingenio, caetera mortis erunt
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#8
Thanks Nick .
Now, on the inductance, is it possible if you put them phycially close to each other - or eg. with their top faces touching, you could partially cancel the inductance ? That might be worth trying. After all, assuming the 'goop' inside doesn't have much magnetic effect, they seem a bit like an air-cored inductor (?) .
Now, on the inductance, is it possible if you put them phycially close to each other - or eg. with their top faces touching, you could partially cancel the inductance ? That might be worth trying. After all, assuming the 'goop' inside doesn't have much magnetic effect, they seem a bit like an air-cored inductor (?) .
"Once you find out ... the Circumstances ; then you can go out"
#9 Capaicitors
I have just tried two non - poarised 100uF Rubycons and they sound quite good but as stated it is hard to tell, I see Maplin sell this type as well.
Acorn
Acorn
#10
These are worth trying, they sounded different in a crossover but a bit too toppy for me.
http://www.hificollective.co.uk/compone ... polar.html
But back to back caps were a success.
http://www.hificollective.co.uk/compone ... polar.html
But back to back caps were a success.
Much to learn there is.
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#11
Looking at the data sheet for those, it says service life is 3,000 hours.
That does not seem a lot, just over a year at 8 hours a day.
That does not seem a lot, just over a year at 8 hours a day.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#12
If you open up the .pdf file, you'll see they have a life of 5000 hours at +85°C , that's what I expected - usually these 'working life' numbers are quoted for elevated temperature . You should get several years at 30-40°C like most electrolytics, I would think .
"Once you find out ... the Circumstances ; then you can go out"
- jack
- Thermionic Monk Status
- Posts: 5504
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#13
Not sure that you'll be able to lower the total inductance by simply repositioning the caps - parasitic inductance is internal to the caps and there is not much (if any) stray external field - you'll just have to live with it, like the ESR and leakage - making a non-polarised cap this way is a compromise, not a direct replacement.IslandPink wrote:Thanks Nick .
Now, on the inductance, is it possible if you put them phycially close to each other - or eg. with their top faces touching, you could partially cancel the inductance ? That might be worth trying. After all, assuming the 'goop' inside doesn't have much magnetic effect, they seem a bit like an air-cored inductor (?) .
Vivitur ingenio, caetera mortis erunt