Page 1 of 1
#1 Maglev
Posted: Fri Mar 15, 2019 4:08 pm
by IslandPink
#2 Re: Maglev
Posted: Fri Mar 15, 2019 4:30 pm
by Nick
I got excited then as I thought they may be about maglev on the platter, which is something I have been thinking about with the turntable I have been working on for ever.
#3 Re: Maglev
Posted: Fri Mar 15, 2019 6:51 pm
by ed
old thicko here......
I really can't make out the operating principal......is the platter floating or is it's mass sitting on the bearing?
#4 Re: Maglev
Posted: Fri Mar 15, 2019 7:03 pm
by IslandPink
Yes I thought there was a picture of the magnets there somewhere , quite disappointing.
Nick, what do you mean - I assumed there would be some sort of ring magnet on both the plinth and on the platter ?
#5 Re: Maglev
Posted: Fri Mar 15, 2019 7:51 pm
by Ant
It just seems to use a pair of opposing magnets to lift the platter so it isn't running on a hardened ball or bearing shaft end in the bottom of the bearing housing, but it still runs a bearing that is a shaft as normal with a set of liners
#6 Re: Maglev
Posted: Fri Mar 15, 2019 8:00 pm
by Nick
Ahh ok, it is doing what I hoped supporting the platter on a magnet like clearaudio and a few others do. Hard to see from the pictures.
#7 Re: Maglev
Posted: Sun Mar 17, 2019 8:45 am
by ed