Hi all
am having a problem setting up a 940 I have had for many years but not used. I concluded that the internal wiring was damaged as my multimetre showed nothing between the white (L+) cartridge tag (top left) and the mini-din pin 1 at the arm-base. As an afterthought (and much prodding and fiddling) I tested pin 2 and hey presto. Isn't L+ usually connected to pin 1? If so it is possible that a previous re-wire has confused things.
Also, do I unscrew the 2 small screws on the top of the unipivot housing to get at it and the silicon fluid?
Thanks
Adrian