#1 Wanted: Pre-amp choke
Posted: Sat Apr 07, 2018 5:55 pm
Before I was going to buy one of these (because it has significantly lower DCR than the similar Hammond); http://primarywindings.com/product/10-h ... -dc-choke/ , was wondering whether anyone had a used choke they wished to recycle.
It's going to be used in a choke-fed filter, and looking for something between say 8 and 15H, and 100 to 150mA allowing for the ac current element. Above 110mA would allow me to have 20mA through each shunt regulator as I had originally intended.
Please message me if anyone has anything to offer.
Thanks in advance,
Mike.
It's going to be used in a choke-fed filter, and looking for something between say 8 and 15H, and 100 to 150mA allowing for the ac current element. Above 110mA would allow me to have 20mA through each shunt regulator as I had originally intended.
Please message me if anyone has anything to offer.
Thanks in advance,
Mike.