Remember These?
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#586 Re: Remember These?
Cant really do much to the input/driver stage, as it’s all on PCBs, including the 9 pin sockets, so there’s not much chance of breaking anything. I’m done messing about now, honest.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#587 Re: Remember These?
I messed around with mine and broke it. Thought I might make it a bit better. Haven't been back in the room since last Friday when it broke. When I can do it, I'll try and put it back to how it was, I hope.
Cheers,
Stephen
#588 Re: Remember These?
I plan to experiment Steve but first I need to give myself a kick up the backside to get it finished!Cressy Snr wrote: ↑Wed May 15, 2019 11:36 am I’d say to Ray that it’s worth rolling 6H30pi, 6N1P and 6CG7 to see which version of the music you prefer, as the one you choose will of course, be system dependent.
Sorry, I couldn't resist!
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#589 Re: Remember These?
Was playing the amp earlier today and my phone was charging near it. “Bit bi dit, bi dit, bi dah dzzzzzzzzzzzzz” went the speakers, seconds later a text arrived on the phone. “Oh, that’s interesting” I mused. Blasted amp was picking up RF.
To cut a long story short, I replaced the 1K grid stoppers on the 13E1s. No 10K left, so 15K carbon comps had to do. Got the missus to ring my phone with it next to the amp and silence reigned, until said silence was broken by my phone ringing. Much better! Later on my daughter texted me to pick her up after work whilst phone was still charging next to amp, and this time, no noises prior to the text arriving.
Now I’d said that treble had been better with the low value grid stoppers, yet now it was better with the 15K stoppers, than either the 10K or 1K had been, and better yet, the separation between instruments was improved as was stage width and depth...go figure. Not that I’m complaining, but 13E1s are fussy bleeders in power cathode follower mode. They’re are not as cantankerous as 6C33Cs by any stretch of the imagination, but nevertheless, parasitics are something to keep a weather eye on with them.
I remember Steve giving me a pair of top-cap 12E1 years ago and they used to take off into the stratosphere without much provocation. I never did tame those and ended up using the ubiquitous 6080 and 6336A as regulators pass tubes instead.
To cut a long story short, I replaced the 1K grid stoppers on the 13E1s. No 10K left, so 15K carbon comps had to do. Got the missus to ring my phone with it next to the amp and silence reigned, until said silence was broken by my phone ringing. Much better! Later on my daughter texted me to pick her up after work whilst phone was still charging next to amp, and this time, no noises prior to the text arriving.
Now I’d said that treble had been better with the low value grid stoppers, yet now it was better with the 15K stoppers, than either the 10K or 1K had been, and better yet, the separation between instruments was improved as was stage width and depth...go figure. Not that I’m complaining, but 13E1s are fussy bleeders in power cathode follower mode. They’re are not as cantankerous as 6C33Cs by any stretch of the imagination, but nevertheless, parasitics are something to keep a weather eye on with them.
I remember Steve giving me a pair of top-cap 12E1 years ago and they used to take off into the stratosphere without much provocation. I never did tame those and ended up using the ubiquitous 6080 and 6336A as regulators pass tubes instead.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#590 Re: Remember These?
So were the 1K's carbon composition or something inductive ?
"Once you find out ... the Circumstances ; then you can go out"
#591 Re: Remember These?
Sure you have it sorted, but AFAIK, that sequence is when a phone is talking to a cell with GSM (2G). If it finds one it can switch to latter protocols so you may not be comparing like with like.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#592 Re: Remember These?
It seems to be OK at the moment.
Having built the Transcendent 300B and the Mini-Beast OTLs, I know that Bruce uses 10K grid stoppers on each 300B/EL509.
On the push pull EL509 output stage of the beast he uses 100K stoppers. Some commentators think grid stoppers are the work of the devil and push the ferrite bead solution. But I’ve found with these valves -13E1/6C33C (which let’s face it were never designed for audio frequencies) that they have to be held down with a veritable forest of restraining straps.
Trouble is with these, is that it then becomes a balancing act between high value of stopper and value of grid resistor, because if the combination of the two goes one way, the bias gets unstable; the other way and the thing oscillates. The cathode CCS goes some way to avoiding the former but it can’t help the latter.
Having built the Transcendent 300B and the Mini-Beast OTLs, I know that Bruce uses 10K grid stoppers on each 300B/EL509.
On the push pull EL509 output stage of the beast he uses 100K stoppers. Some commentators think grid stoppers are the work of the devil and push the ferrite bead solution. But I’ve found with these valves -13E1/6C33C (which let’s face it were never designed for audio frequencies) that they have to be held down with a veritable forest of restraining straps.
Trouble is with these, is that it then becomes a balancing act between high value of stopper and value of grid resistor, because if the combination of the two goes one way, the bias gets unstable; the other way and the thing oscillates. The cathode CCS goes some way to avoiding the former but it can’t help the latter.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
#593 Re: Remember These?
That generally is the point of inductive solutions, they don't affect the DC conditions.Trouble is with these, is that it then becomes a balancing act between high value of stopper and value of grid resistor, because if the combination of the two goes one way, the bias gets unstable; the other way and the thing oscillates.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#594 Re: Remember These?
I’ll see if I can find some ferrite beads before the weekend. If not, it’s something to think about for the future.Nick wrote: ↑Thu May 23, 2019 10:55 amThat generally is the point of inductive solutions, they don't affect the DC conditions.Trouble is with these, is that it then becomes a balancing act between high value of stopper and value of grid resistor, because if the combination of the two goes one way, the bias gets unstable; the other way and the thing oscillates.
Though the amp seems to be working fine ATM, ferrite beads ought to be more elegant solution than forcibly slowing down the output stage.
It’s all a useful learning curve.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#595 Re: Remember These?
Cressy Snr wrote: ↑Wed May 22, 2019 11:12 pm Was playing the amp earlier today and my phone was charging near it. “Bit bi dit, bi dit, bi dah dzzzzzzzzzzzzz” went the speakers, seconds later a text arrived on the phone. “Oh, that’s interesting” I mused. Blasted amp was picking up RF.
I've frequently had that. And on different amps, ever since I've had a smart phone. I don't worry about it and I don't try to fix it.
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#596 Re: Remember These?
Aye,
It’s high time I took a leaf out of your book.
Bruce Rozenblit himself says amp design is full of compromises and perfection is impossible because “optimizing one aspect of the design will alway cause another to deteriorate”
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- jack
- Thermionic Monk Status
- Posts: 5502
- Joined: Wed Dec 29, 2010 8:58 pm
- Location: ɐılɐɹʇsnɐ oʇ ƃuıʌoɯ ƃuıɹǝpısuoɔ
- Contact:
#597 Re: Remember These?
It's called "engineering" - it's what differentiates us from scientists and theoreticians.
I have some suitable ferrets (sic) that I can bring along if you want...
I have some suitable ferrets (sic) that I can bring along if you want...
Vivitur ingenio, caetera mortis erunt
#598 Re: Remember These?
Yep, but just to be contentious its also called marketing. I use as an example how it wasn’t possible to DC heat that OTL until Andrew did it.
Just fed and cleaned out the Ferrets, its my morning job.
Just fed and cleaned out the Ferrets, its my morning job.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#599 Re: Remember These?
Thanks Nick, that’d be good!
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#600 Re: Remember These?
I once tried putting a small value coil in series with the output of each OPT, between where the NFB is taken off and the speaker terminals. It's purpose was to prevent the amp (an EL34 p-p type) going into oscillation if a large (-ish) value capacitor was put across the terminals. It worked like a charm. Unfortunately it also killed off the upper treble
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."