Dieselpunk Preamp of Doom and the Beast with Two Backs
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#241 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Not sure if the last picture I posted is visible to all, iCloud seems to move the URL's around. Trying again from my email service provider's web-hosting service...
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#242 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
It was there yesterday, then it wasn’t.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#243 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Can you see the new one okay?
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#244 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Yes.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
#245 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Good to see you back active Mr. Idler
Sorry, I couldn't resist!
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#246 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Thanks - if it hadn't been for the move down south, this would have been done by now. What also hasn't helped is the fact we've had to go from a 3-bed to a 2-bed apartment (albeit with bigger rooms), and give up the self-storage (the ones here are double the cost of what I was paying in Chesterfield).
So it's taken a Herculean effort of sorting out and throwing away or donating junk, just to get to the point where I was able to carve out enough space to work on these things.
So it's taken a Herculean effort of sorting out and throwing away or donating junk, just to get to the point where I was able to carve out enough space to work on these things.
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#247 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
The right channel amp is almost at the point where I can do a heater test. I just need to solder the 12V trigger wiring to the 4 pin XLR inlet - before I do that, I want to sanity check with the pre-amp to ensure the 12V is appearing where I expect it to!
I have already tested the soft-start so that should work, but need to make sure the DC blocker doesn't go bang....
I have already tested the soft-start so that should work, but need to make sure the DC blocker doesn't go bang....
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#248 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Much shoddier than my recent efforts.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#249 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Oh I don't know, I think your recent efforts have more than held up the good name of the House of Shod, Mr C!
A successful heater test - actually, this also tested out the remote switch-on (via pre-amp), soft-start and DC blocker. The DC blocking caps didn't explode, so that's a good thing. This also told me that the on-light is WAY too bright - need to get a much dimmer one.
I thought (ha!) that I might get it finished today - nope, not even close. Maybe next week....
A successful heater test - actually, this also tested out the remote switch-on (via pre-amp), soft-start and DC blocker. The DC blocking caps didn't explode, so that's a good thing. This also told me that the on-light is WAY too bright - need to get a much dimmer one.
I thought (ha!) that I might get it finished today - nope, not even close. Maybe next week....
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#250 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Big day yesterday...
Amp 1 is officially completed. Not only that, it works without going up in smoke. Here it is, driving one Metronome (which you can't see)...
And here are the completed innards:
How does it sound?
Oh, it's good. It's VERY good. Even only on one channel.
One could immediately hear that the bass control and tightness had improved considerably over the 15W stereo version. Even though the Metronomes are relatively efficient speakers, you could really hear what the extra wattage was bringing to the table, they seem to like having some real power behind them.
Resolution is also improved. It needed about two or three hours for a little bit of midrange sharpness to go away, after that it just played music beautifully.
It's now back on the bench with the base off again, as a visual reference for the other one, which has the heater wiring and most of the output stage components in. Onwards....
Amp 1 is officially completed. Not only that, it works without going up in smoke. Here it is, driving one Metronome (which you can't see)...
And here are the completed innards:
How does it sound?
Oh, it's good. It's VERY good. Even only on one channel.
One could immediately hear that the bass control and tightness had improved considerably over the 15W stereo version. Even though the Metronomes are relatively efficient speakers, you could really hear what the extra wattage was bringing to the table, they seem to like having some real power behind them.
Resolution is also improved. It needed about two or three hours for a little bit of midrange sharpness to go away, after that it just played music beautifully.
It's now back on the bench with the base off again, as a visual reference for the other one, which has the heater wiring and most of the output stage components in. Onwards....
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
- Cressy Snr
- Amstrad Tower of Power
- Posts: 10582
- Joined: Wed May 30, 2007 12:25 am
- Location: South Yorks.
#251 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Niiice.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#252 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Fab Good effort !
"Once you find out ... the Circumstances ; then you can go out"
- Mike H
- Amstrad Tower of Power
- Posts: 20189
- Joined: Sat Oct 04, 2008 5:38 pm
- Location: The Fens
- Contact:
#254 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Quool!
Fabarooney.
Fabarooney.
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
- Thermionic Idler
- Old Hand
- Posts: 1018
- Joined: Sun Apr 22, 2012 8:22 pm
- Location: Southsea
#255 Re: Dieselpunk Preamp of Doom and the Beast with Two Backs
Thank you. Going all out to finish the other one now...
Deck: Garrard 301 - Audio Origami PU7 - NW Analogue DH3S
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets
Phono: Pete Millett LR, Lundahl SUT, AMB σ22 PSU
Linestage: Bruno Putzeys Balanced Pre + Hans Polak relay mod, LCDuino control
Power amps: 300B PP 'Symmetric Reichert'
Speakers: FF225WK Big Mets