Dual polarity power supply.
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#1 Dual polarity power supply.
I've got my thinking cap on.
My thoughts are for a +/- 22v dual polarity power supply for a JLH class A sand amp.
Would I be best to use 24v 78xx and 79xx regulators and then "lose" 2v with resistance ?
If not, is there a better way ?
My thoughts are for a +/- 22v dual polarity power supply for a JLH class A sand amp.
Would I be best to use 24v 78xx and 79xx regulators and then "lose" 2v with resistance ?
If not, is there a better way ?
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
-
- Thermionic Monk Status
- Posts: 5648
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#2
Good question, but I don't think it's that simple.
The regulator will need to drop a minimum voltage across it; and if you use cap input then the voltage on the caps immediately after the bridge will be ~1.4x what comes out of the bridge. Then you'll drop 2 x 0.7V for the diodes in the bridge (assuming ordinary 1N types rather than Schottkies).
The regulator will need to drop a minimum voltage across it; and if you use cap input then the voltage on the caps immediately after the bridge will be ~1.4x what comes out of the bridge. Then you'll drop 2 x 0.7V for the diodes in the bridge (assuming ordinary 1N types rather than Schottkies).
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#3
I was thinking of losing the 2v after the regulators.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
-
- Thermionic Monk Status
- Posts: 5648
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#4
If you want a 22V supply then let's assume the regulator needs to drop a minimum of 1.25V across it (don't know, haven't looked) so you need 23.25V before the reg. Assuming you use cap input the voltage "before" the caps will be 23.25V / 1.4 = 16.6V. And if you use a plain vanilla bridge you need an extra 2 x 0.7 = 1.4V. So you need a secondary winding of at least 18V.
But you probably want a little more to make sure the regulator doesn't drop out. So maybe a 20V secondary and let the regulator do its job and "consume" the extra volts across it (in heat through a heatsink). If you feed the reg with bang on the volts it requires there's a very good chance it will drop out of regulation.
But I've never designed a SS power supply so there could be all sorts of hidden pitfalls. Hopefully someone who knows what they're doing pipes up
But you probably want a little more to make sure the regulator doesn't drop out. So maybe a 20V secondary and let the regulator do its job and "consume" the extra volts across it (in heat through a heatsink). If you feed the reg with bang on the volts it requires there's a very good chance it will drop out of regulation.
But I've never designed a SS power supply so there could be all sorts of hidden pitfalls. Hopefully someone who knows what they're doing pipes up
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#5
The 7824 and 7924 regulators are fixed at 24v. They don't do a 22v version.
For cheapness and convenience I was thinking of using two of these.(monoblocks).
http://www.ebay.co.uk/itm/291443700146? ... EBIDX%3AIT
For cheapness and convenience I was thinking of using two of these.(monoblocks).
http://www.ebay.co.uk/itm/291443700146? ... EBIDX%3AIT
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
-
- Thermionic Monk Status
- Posts: 5648
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#6
Ah, okay didn't realise they were fixed regs. I can certainly see the attraction of £4.09 ready made from t'other side of the world. How are we ever to compete?
Anyway, can the device handle 24V? If so job done, if not, I suspect you might need another regulator - unless the current draw is constant, which it may be, otherwise the voltage drop will change.
Have you ever thought of using valves
Anyway, can the device handle 24V? If so job done, if not, I suspect you might need another regulator - unless the current draw is constant, which it may be, otherwise the voltage drop will change.
Have you ever thought of using valves
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#7
I, like most of us probably, am suspicious of the electrical components quality on things that cheap.
Alternative is a pair of these, and populate with UK sourced parts.
http://www.ebay.co.uk/itm/261874553096? ... EBIDX%3AIT
Alternative is a pair of these, and populate with UK sourced parts.
http://www.ebay.co.uk/itm/261874553096? ... EBIDX%3AIT
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#9
I'd forgotten about that.simon wrote:Or possibly hang on for Andrew's latest board?
PS. I don't think it is suitable for a +/- voltage.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#10
Another question.
If I used schotty diodes I might be able to use the 18v toroids that were on the GK-71 heaters.
Are there better schotty diodes than others ?
If I used schotty diodes I might be able to use the 18v toroids that were on the GK-71 heaters.
Are there better schotty diodes than others ?
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#11
Looks like I will be using two separate regulators linked together now, because the current limit of my previous suggestion is not quite enough.
Ray P is helping me by supplying the PCBs I need.
Thanks Ray.
Ray P is helping me by supplying the PCBs I need.
Thanks Ray.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#12
If its for a power amp, I would use a couple of mosfet followers and a lot of caps. Have a look at some of the pass labs power supplies.pre65 wrote:Looks like I will be using two separate regulators linked together now, because the current limit of my previous suggestion is not quite enough.
Ray P is helping me by supplying the PCBs I need.
Thanks Ray.
Is there a reason it has to be exactly 22v?
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#13
I'll know more when I've received the PCBs and done some homework on the circuit details.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#14
No the voltage doesn't have to be exactly 22V, the amps will happily work on rails from +/-15-25V, obviously affecting the output of the amp.
Assuming LT1084 regulator chips installed in the power regulator boards that I've sent you, and making some basic assumptions about rectifier loss, 18V AC should be OK for around 22V DC out, but if you want to use a CR pre-filter you'll need a little more AC in.
The amp is Class A and you'll need the regulators to be delivering a constant 1.5 - 2.0A so in my build I'll be using LT1084 regs, which are 5A devices.
Ray
Assuming LT1084 regulator chips installed in the power regulator boards that I've sent you, and making some basic assumptions about rectifier loss, 18V AC should be OK for around 22V DC out, but if you want to use a CR pre-filter you'll need a little more AC in.
The amp is Class A and you'll need the regulators to be delivering a constant 1.5 - 2.0A so in my build I'll be using LT1084 regs, which are 5A devices.
Ray