Anode to Anode cap coupling?

We all start somewhere
User avatar
ed
retired
Posts: 4474
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

Re: Anode to Anode cap coupling?

Post by ed » Wed Jan 13, 2021 9:52 am

this is the one I'm installing...I will search out the others in the meantime...
pteq.jpg
apologies for the focus:
sonar pt1.jpg
There's nowhere you can be that isn't where you're meant to be

User avatar
Dave the bass
Amstrad Tower of Power
Posts: 11548
Joined: Tue May 22, 2007 4:36 pm
Location: NW Kent, Darn Sarf innit.

Re: Anode to Anode cap coupling?

Post by Dave the bass » Wed Jan 13, 2021 12:41 pm

ed wrote:
Wed Jan 13, 2021 9:52 am
apologies for the focus:
No probs, its 15 years old now, bit of rust but its still going.

Oh, hang on...
"The fat bourgeois and his doppelganger"

User avatar
ed
retired
Posts: 4474
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

Re: Anode to Anode cap coupling?

Post by ed » Sun Jan 17, 2021 3:30 pm

I've been fiddling with the pultec eq..devil makes work for idle hands etc etc

I dug out this oldie and applied a bit of pultec to the master...
here's the pultec contribution:

http://www.vitalstates.org/diy/misc/bear-pt.mp3

and here's the original:

www.vitalstates.org/diy/music/bear.mp3

If your chum already has a good version on his daw them I'm not sure what he might gain by spending money and time in building a real one....other than what we all acheive by building these pesky amplifiers.....unless he's planning on going analog, in which case..respect!
There's nowhere you can be that isn't where you're meant to be

Post Reply